Kohler K-1200-AC, K-1201-AC, K-1205-AC, K-1206-AC, K-1210-AC ROUGHING-IN K-1215-AC, K-1216-AC

4. ROUGHING-IN: K-1215-AC, K-1216-AC

A. ORDERING INFORMATION

Factory installed components include pump and air switch transmitter.

Information contained in this roughing-in also applies to K-1216-J1-AA and K-1216-JA-AA.

Whirlpool with wall timer		K-1215-AC
Whirlpool with air actuator (shown)		K-1216-AC
Accessories/hardware:
Drain	K-7161-AF	recom-
		mended
Vinyl tiling-in bead*	K-1179	optional

*Use K-1179 vinyl bead when wall material contacts any top surface of bath.

B. REQUIRED ELECTRICAL SERVICE

Dedicated circuits required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI):

Pump/control 120 V., 15 A, 60 Hz

C. PRODUCT INFORMATION

Fixture:	basin area		top area		weight
Bathing well	52” x 23”		65-1/2” x		95 lbs.
			26-1/2”
	water depth		capacity
To overflow	15-1/2”		76 gals.
Pump:		hp	V	Hz		A
60 Hz		3/4	120	60		10

D. INSTALLATION NOTES

Refer to installation instructions included with fixture before beginning installation.

*Some K-1179 tiling-in beads may require trimming of the bottom edge for proper fit.

18”

1-7/8”

3”

FIELD WIRING COMPARTMENT

PUMP

8-7/8”

71-3/16”

ROUGHING-IN NOTES

Fixture dimensions are nominal and conform to toler- ances in ANSI Standard Z124.1.

No change in measurements if connected with drain illustrated.

Cut-out	34-1/2” x 70”
Minimum access:
Pump/control box	20” W x 15” H panel	required

PUMP/CONTROL ACCESS 36”

1-3/4”

21”

2-7/8”

3”

1.25>132

15/16”

1-1/2” I.P.S. THR’D

1-1/2” O.D.

106548-CA(9437) 8 Kohler Co., Kohler WI