Kohler K-1215-AC, K-1200-AC, K-1201-AC, K-1205-AC, K-1206-AC ROUGHING-IN K-1220-AC, K-1221-AC

5. ROUGHING-IN: K-1220-AC, K-1221-AC

A. ORDERING INFORMATION

Factory installed components include pump and air switch transmitter.

Information contained in this roughing-in also applies to K-1221-J1-AA and K-1221-JA-AA.

Whirlpool with wall timer		K-1220-AC
Whirlpool with air switch (shown)		K-1221-AC
Accessories/hardware:
Drain	K-7161-AF	recom-
		mended
Apron	K-1223	optional
Vinyl tiling-in bead*	K-1179	optional

*Use K-1179 vinyl bead when wall material contacts any top surface of bath.

B. REQUIRED ELECTRICAL SERVICE

Dedicated circuits required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI):

Pump/control 120 V., 15 A, 60 Hz

C. PRODUCT INFORMATION

Fixture:	basin area		top area		weight
Bathing well	47” x 37”		67” x 32”		120 lbs.
	water depth		capacity
To overflow	16-7/8”		117 gals.
Pump, 1 phase		hp	RPM	V		Hz	A
60 Hz		3/4	3450	120		60	10

D. INSTALLATION NOTES

Refer to installation instructions included with fixture before beginning installation.

*Some K-1179 tiling-in beads may require trimming of the bottom edge for proper fit.

24”

FIELD WIRING

COMPARTMENT

PUMP

2”

9”

72”

3-1/2”

2-7/8” 13/16”

3”

Kohler Co., Kohler WI

ROUGHING-IN NOTES

Fixture dimensions are nominal and conform to toler- ances in ANSI Standard Z124.1.

No change in measurements if connected with drain illustrated.

Cut-out	46-1/4” x 70-1/4”
Minimum access:
Pump/control box	20” W x 15” H panel	required

PUMP/CONTROL ACCESS

48”

1-3/4”

23”

1-1/2” I.P.S. THR’D

	1-1/2” O.D.	1.15>132
9		106548-CA(9437)