Kohler K-1210-AC, K-1215-AC, K-1205-AC, K-1206-AC, K-1220-AC manual ROUGHING-IN K-1200-AC, K-1201-AC

1. ROUGHING-IN: K-1200-AC, K-1201-AC

A. ORDERING INFORMATION

Factory installed components include pump and air switch transmitter.

Information contained in this roughing-in also applies to K-1201-J1-AA, K-1201-J1-AB and K-1201-JA-AA.

Whirlpool with wall timer		K-1200-AC
Whirlpool with air actuator (shown)		K-1201-AC
Accessories/hardware:
Drain	K-7161-AF	recom-
		mended
Vinyl tiling-in bead*	K-1177	optional

*Use K-1177 vinyl bead when wall material contacts any top surface of bath.

B. REQUIRED ELECTRICAL SERVICE

Dedicated circuits required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI):

Pump/control 120 V., 15 A, 60 Hz

C. PRODUCT INFORMATION

Fixture:	basin area		top area		weight
Bathing well	42” x 17”		55” x 25”		93 lbs.
	water depth		capacity
To overflow	12-1/8”		50 gals.
Pump:		hp	V	Hz		A
60 Hz		1/2	120	60		8

D. INSTALLATION NOTES

Refer to installation instructions included with fixture before beginning installation.

ROUGHING-IN NOTES

Fixture dimensions are nominal and conform to toler- ances in ANSI Standard Z124.1.

No change in measurements if connected with drain illustrated.

	Cut-out	28-1/2” x 58-1/2”
	Minimum access:
FIELD WIRING COMPARTMENT	Pump/control box	20” W x 15” H panel required
15”	PUMP

1-1/2”		PUMP/CONTROL ACCESS
	8-1/2”	30”
	60”
2-3/4”		1-1/2”
		17”
	2-7/8”	3/16”
	3”	1-1/2” I.P.S. THR’D
1.25>132		1-1/2” O.D.

Kohler Co., Kohler WI 5 106548-CA(9437)