Kohler K-1205-AC, K-1215-AC, K-1200-AC, K-1201-AC, K-1206-AC manual Optional K-1515 Apron Installation

17. OPTIONAL K-1515 APRON INSTALLATION

NOTE: For use with K-1200 and K-1201 models.

Make sure the bath is installed according to the instructions. Provide backing on each of the recessed walls for the nailing-in flange.

After bath is leveled and set, apply the vinyl trim strip to the bath. Carefully apply a 1/16” bead of clear silicone adhesive (provided) onto the vinyl strip as illustrated. Apply vinyl strip to the underside of the bath rim, being careful to align the lip of the strip to the bath rim as shown in the inset. Immediately wipe off any excess sealant.

Tilt apron and carefully slip apron into groove on underside of rim.

Temporarily tack a nail in the top hole of the nailing-in flange on each side of the apron and ensure that the apron is positioned as close to the bath rim as possible.

Plumb the apron and secure the nailing-in flange using #6d large-head galvanized nails.

Silicone Adhesive

Vinyl Trim

Strip

Nailing-in

Flange

	Vinyl Trim	Bath
Apron		Rim
	Strip
	Apron

Kohler Co., Kohler WI 23 106548-CA(9437)