Kohler K-1220-AC, K-1215-AC, K-1200-AC, K-1201-AC, K-1210-AC manual ROUGHING-IN K-1205-AC, K-1206-AC

2. ROUGHING-IN: K-1205-AC, K-1206-AC

A. ORDERING INFORMATION

Factory installed components include pump and air switch transmitter.

Information contained in this roughing-in also applies to K-1206-J1-AA, K-1206-J1-AB and K-1206-JA-AA.

Whirlpool with wall timer		K-1205-AC
Whirlpool with air actuator (shown)		K-1206-AC
Accessories/hardware:
Drain	K-7161-AF	recom-
		mended
Vinyl tiling-in bead*	K-1177	optional

*Use K-1177 vinyl bead when wall material contacts any top surface of bath.

B. REQUIRED ELECTRICAL SERVICE

Dedicated circuits required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI):

Pump/control 120 V., 15 A, 60 Hz

C. PRODUCT INFORMATION

Fixture:	basin area		top area		weight
Bathing well	44” x 22”		55” x 25”		100 lbs.
	water depth		capacity
To overflow	15-1/8”		60 gals.
Pump:		hp	V	Hz		A
60 Hz		1/2	120	60		8

D. INSTALLATION NOTES

Refer to installation instructions included with fixture before beginning installation.

16”

1-3/8”

2-3/4”

1.25>132

FIELD WIRING COMPARTMENT

8-3/8”

60”

2-7/8” 3/8” 3”

ROUGHING-IN NOTES

Fixture dimensions are nominal and conform to toler- ances in ANSI Standard Z124.1.

No change in measurements if connected with drain illustrated.

Cut-out	30-1/2” x 58-1/2”
Minimum access:
Pump/control box	20” W x 15” H panel	required

PUMP

PUMP/CONTROL ACCESS

32”

1-1/2”

20”

1-1/2” I.P.S. THR’D

1-1/2” O.D.

106548-CA(9437) 6 Kohler Co., Kohler WI