Invacare IMX1 user manual Operating Information, Weight Limitation and Model NumbersWARNING

Page 7

2 SAFETY

2.3Operating Information

￿Skin condition should be checked very frequently after the installation of any new seating system.

Your therapist and physician should be consulted if you have any questions regarding individual limitations and needs.

Working with your therapist, physician, and equipment supplier is the best way to assure that a seating choice matches your individual needs.

As the needs of the individual become more complex, the seating evaluation becomes more important.

2.4Weight Limitation and Model NumbersWARNING

Refer to the chart for the weight limitation and stock model numbers. RM = Mono Mount (installs onto rigidizer bar)

CF = Fixed Dual Mount (installs onto back canes)

*Configured model number: IMX1 (includes Mono Mount, Fixed Dual Mount and Quick Release Dual Mount)

WIDTH

 

HEIGHT

 

WEIGHT LIMIT

 

9 IN (23 CM)

12 IN (30 CM)

16 IN (41 CM)

 

14 in (36 cm)

IMX11409-RM

IMX11412-RM

IMX11416-RM

250 lbs (113 kg)

 

IMX11409-CF

IMX11412-CF

IMX11416-CF

 

15 in (38 cm)

IMX11509-RM

IMX11512-RM

IMX11516-RM

 

 

IMX11509-CF

IMX11512-CF

IMX11516-CF

 

16 in (41 cm)

IMX11609-RM

IMX11612-RM

IMX11616-RM

 

 

IMX11609-CF

IMX11612-CF

IMX11616-CF

 

17 in (43 cm)

IMX11709-RM

IMX11712-RM

IMX11716-RM

 

 

IMX11709-CF

IMX11712-CF

IMX11716-CF

 

18 in (46 cm)

IMX11809-RM

IMX11812-RM

IMX11816-RM

 

 

IMX11809-CF

IMX11812-CF

IMX11816-CF

 

14 in (36 cm) - 18 in (46 cm)

 

IMX1*

 

 

Part No. 1171914

7

Invacare® Matrx® MX1

Image 7
Contents Model IMX1 Invacare Matrx MX1Invacare Matrx MX1 Contents Invacare Matrx MX1 SymbolsGeneral Overview Important InformationOuter Cover Limited Warranty North AmericaIntended Use SafetyInstallation Information General GuidelinesOperating Information Weight Limitation and Model NumbersWARNINGIncluded Items Installation OverviewBefore Installation Mono MountInch 23 cm Tall MX1 Back Cushions Only Installing the Mounting HardwareBand clamp in place Carefully slide the rigidizer bracket onto the band clampInstalling the Tracking Plate on the Back Shell Adjusting the Back Height Installing the Back Shell onto the Mounting HardwareAdjusting the Back Angle Removing the Mono Mount Hardware Fixed Dual Mount Our customer service departmentRepeat Steps 1-3 for the opposite side Clamp Body AdjustmentInstalling the Back Installing the Band ClampsFixed Dual Mount Loosen the compression bar hardware a Adjust the back to the desired heightAfter Installation Adjusting the Back Angle and Back DepthLoosen the screws a on the side of both clamp bodies B Quick Release Dual Mount Loosening the Compression Bar Securing the Clamp Body to the Band Clamp Securing the Clamp Body Assembly to the Back Cane Inside View Adjusting the Back Height Removing the Back Cushion Mounting holes B on the back shell C Installing/Adjusting the Lumbar Support Plug InsertsOptions Adhesive PadsWidth Installing the Optional Privacy FlapInspection MaintenanceCleaning General Cleaning LaunderingUsability Survey USA TRD0283