Viewing System Values (Main Display Mode)
Viewing System Values (Main Display Mode)
Nine system values (as at right) can be viewed in Main Display Mode.
If a system value is not available (for example, because of an incorrectly configured or disconnected battery temperature sensor), the following is displayed.
Details about the other display indicators can be found on page
►To view system values
1Press the 
or 
key to scroll through the system values in Main Display Mode.
2Only six individual rectifier currents are displayed at once. If more than six rectifiers are installed, press the 
or 
key to scroll through the list.
3Press the 
key to return to the top of the list – total rectifier current.
Main Display Mode
Total Rectifier
Current
(Default Display)
Total output power delivered by the rectifiers as a percentage of available power
Individual
Rectifier
Currents
Copyright © | ||
IPN | ||
|