EnGenius Technologies 1X instruction manual Basic Base Station Features, Antenna, ,Q

Base Features Charger Illustration

Basic Base Station Features

1.Antenna

a.The antenna port has a reverse thread connector; to remove antenna or cable, turn clockwise; to install, turn counterclockwise. Improper installation may damage the connector

b.When using an outdoor antenna, locate the antenna (not the base station itself) as high as possible for a clear transmission path.

2.LED

a.Power: it indicates base station has power.

b.In-Use: it indicates an active telephone line.

c.Intercom: it indicates “Intercom” taking place.

d.Broadcast: it indicates “Broadcast” taking place.

3.Reset Button

a.Restores base station to factory settings

b.Reset button is indented to prevent accidental system reset.

c.All handsets (including administrator) and additional base(s) need to be re-registered after a base station reset.

4.Registration Key (REG)

Enters registration mode along with handset, assigns handset ID (10-99).

5.Line

Standard RJ-11C/CA-11A connector to plug in the telephone line

6.Telephone:

Another RJ-11C to plug in the optional answering machine

7.Audio-in Jack (3.5mm)

8.DC In: to plug in the power adaptor

9.Voice Volume

'&,Q

6SDUH%DWWHU\ &KDUJLQJ6ORW

6SDUH%DWWHU\ &KDUJLQJ,QGLFDWRU

+DQGVHW&KDUJLQJ 6ORW

~17~ ~18~