EnGenius Technologies 1X Call Transfer, Call Manager, Change System Settings by Administrator

­ 11 Select Base On

SAVE

3rd, and 4th base unit.

3.Registration:

a.Press MENU-6 from HS 11 to enter the registration mode

b.Press and hold the Registration (REG) button on that additional base unit, which you want to add into the system) for 2 seconds until 4 LEDs light up.

c.Press handset key “3”, then enter the base ID i.e. 20 for 2nd base, 30 for 3rd base, or 40 for 4th base. this completes the registration process.

Call Transfer

­ 11

Main Menu: ÇÈ

5.Settings

6.Registration

­ 11

Registration: ÇÈ

2.Deregister

3.Set base

(1)Speak to the destination handset.

(2)Press XFER soft key or the END to end announcement. The call is transferred to the destination handset.

Notes: If the destination handset does not answer after handset paging timeout, the call is routed back to the originating handset.

Call Manager

“Call Manager” feature allows the handset to be set to receive all incoming, transferred, and 2-Way/Intercom calls OR just transferred and 2-Way/ Intercom calls. The option is selectable by base 1 to base 4. Besides, this feature allows you to select a specific base station to make an outgoing call.

1. Decide whether to receive the incoming, transferred,

­ 11

1.While a telephone call is in progress, you can place call on hold and transfer the call.

and 2-Way/Intercom calls from a specific base station:
a.	Press menu 8 to enter the Call Manager function.
	The screen will display:
b.	Press 1 to enter “incoming” setting.

Main Menu: ÇÈ

8.Call Manager

9.System

2.	Press HOLD soft key to put call on hold.
3.	Press		soft key to enter feature list for
		OPTION
	selection.
4.	Three types of transfer method:
	a. Transfer PBX
	(1) When DuraFon 1X is adjunct to the PBX system,
		you can transfer the call to an assigned PBX
		extension.

­ 11

You have a Call on hold

UNHOLD OPTION

­ 11

1.Transfer PBX 2.UnancdXfer HS

c. Use ¿ and À Scrolling keys to select a base from

base 1 to base 4.

d. Then press the ÆYES NO key to switch between

Yes and No, then press SAVE key to confirm the

setting.

e. Repeat the process until all base stations from

which calls are to be accepted have been

selected for the handset.

­ 11

Call Manager: ÇÈ

1.Incoming

2.Outgoing

­ 11

Receive Calls

From base 1: ÇÈ

SAVE ÆYES NO

(2)	Normally, each propritory PBX system acquire a
	specific feature code to execute “call transfer”
	function
(3)	You can pre-program that feature code by
	entering the “System” mode (Menu-9); you need
	to enter the base ID to link to the base station
(4)	Press 3 and then enter the specific “call transfer”
	feature code

3.AncdXfer HS

­ 11

System: ÇÈ

2.Flash

3.Xfter PBX

2.Decide whether to select a specific base station to make outgoing call: a. Press menu 8 to enter the Call Manager function.

b. Press 2 to enter “Outgoing” setting.

c. Use ¿ and À to select either On or Off.

d. Scroll to On and press SAVE if you want to select a specific base station before you make an outgoing call. The default setting is Off.

b.Un-announced Call Transfer:

Press “END” before the destination handset answers, the call is automatically transferred to the destination handset.

c.Announced Call Transfer:

Change System Settings by Administrator

There are four types of system setting that can be adjusted by Administrator.

1.Dial Mode

~33~ ~34~