EnGenius Technologies 1X instruction manual Phonebook Operations

a. Press Menu-9 and enter the two-digit base ID to

enter the System mode.

b. Press 1 to enter Tone selection

c. You can adjust the dial mode between Tone and

Pulse. The default setting is Tone.

d. The default setting is Tone.

2. Flash Time

a. Press Menu-9 and enter the two-digit base ID to

­ 11

Main Menu: ÇÈ

8.Call Manager

9.System

­ 11

System: ÇÈ

1.Dial Mode

2.Flash Time

designed handset ID to a specific handset. Press
Menu-9 and enter the two-digit base ID to enter	­ 11
the administration mode.	Please enter
	Ext. #:**
b. Press 4 and then enter two digits ID number to be
		CANCEL
assigned. You will see “Saving Configuration”
and a Done confirmation.
Phonebook Operations

	enter the System mode.
b.	Press 2 to enter Flash selection
c.	You can adjust the flash time from 100ms to 900
	ms (9 levels to choose from.) For example, press
	“2” if the desired flash time is 200ms. You will see
	“DONE” once you finish the setting.
d.	The default setting is 600ms.

­ 11

Flash(msec): ÇÈ

1.100

2.200

­ 11

Done

1.	You can store up to 30 entries in the phonebook.
	Each entry can contain a phone number or handset
	ID (up to 28 digits) and a name (up to14 characters).
2.	To access phonebook, press menu follow by “2” or
	¿or À scrolling key when handset in standby mode.
3.	To add a new entry:

­ 11

Main Menu: ÇÈ

1.KeyGuard

2.PhoneBook

­ 11

ADD OPTION

Notes: If the base station is adjunct to a PBX system, it is recommended to adjust the flash time of DuraFon 1X to match the PBX spec.

a.	Press ADD soft key.
b.	Enter a phone number when LCD prompts
	“Number?” Use	DELETE	soft key to delete the
	last digit entered.	Press	SAVE when completed.

­ 11

Number?

3. Xfter PBX

a. This function is useful if the base station attached

to the PBX system through either the analog port

or the Digital Adaptor. Press Menu-9 and enter the

two-digit base ID to enter the System mode.

b. Press 3 to enter Xfter PBX setting mode

­ 11

System:		ÇÈ
2.	Flash Time
3.	Xfter PBX
­ 11

c. You will then be prompted to enter a name for the

phone number just entered.

(1) Press SAVE key to enter a phone number without

a name. All records without naming will be placed

on top of the list, in the order they are entered.

SAVE DELETE

­ 11

Name?

Caps = *

SAVE DELETE

c.	Use ¿or À scrolling key to switch between ON
	and OFF. The default setting is OFF.
d.	Select ON and press	SAVE	key
e.	You can key in the specific		“call transfer” feature
	code and press OK to confirm the setting. For
	example, if your PBX is N brand, you need to key
	in “Flash”+”*”+”70” as the call transfer code.
f.	You will see a “DONE” confirmation.

Xfer PBX:		ÇÈ
On
	SAVE
­ 11
	Xfer Code:	ÇÈ
	Flash*70
	O K	DELETE

(2)To enter the name, press the corresponding keypad number one or more times according to the order of the character on the key.

(3)Use DELETE soft key to delete the last character entered. When completed, press SAVE soft key to confirm your selection.

Notes: Since the base station is adjunct to a PBX system, you need to adjust the flash time of DuraFon 1X to match the PBX spec and then program the “call transfer” code.

4. Set next Handset ID to be assigned	­ 11
a. This function is useful if you want to assign a	System:		ÇÈ
	3.	Xfter PBX
~35~	4.	Assign Next

~36~