UG060205_C410_RevA.qxd 6/15/05 8:03 PM Page 19
Operating Your Telephone
E
MAKING AND RECEIVING PHONE CALLS
Placing a Phone Call
1.Press the TALK button. (TALK button will illuminate).
2.Dial the number you wish to call.
3.Adjust the rotary Volume Control to desired level.
4.Press the Clarity Power Button (activates the Clarity Power Technology) to gain the extra level of amplification, if needed.
Refer to BOOST CLARITY POWER ON/OFF and BOOST ON/OFF for additional information on volume controls.
To Dial from Memory
1.Press the TALK button.
2.Press the MEM button.
3.Press the number on the dial pad where the desired number has been stored.
4.The call will automatically dial.
5.Adjust volume and Clarity Power as needed.
To Dial From Emergency Storage Location
1.Press the TALK button.
2.Press the desired emergency button.
3.The call will automatically dial.
4.Adjust volume and Clarity Power as needed.
To use a TONE service on a Pulse Line
1.Dial the number you wish to call
2.When the call is answered, press the
*key. Additional numbers you dial are sent as tone signals.
3.After completing the call, press TALK or return the handset to the base. The phone will automatically reset.
Receiving a Call
Handset in Base of Telephone
1.Lift the handset. Do not press TALK. You will automatically be connected.
Handset out of Base
1. Press the TALK button.
Ending a Call
Place the handset in the base cradle or press the TALK button to disconnect the line.
Note: When placing or receiving a call, the handset visual ringer will lite, indicating the phone is in use.
N G L I S H
19