Walker manual Walker W-300 Features, Ringer Controls Visual Ringer, Warble Ringer

WALKER W-300 FEATURES

➤ Ringer Controls ➤ Visual Ringer

E N G L

The Walker W-300 comes with a Special Low-Frequency Ringer designed to be easily heard by everyone.

The ringer also comes with a volume, pitch and warble control, allowing it to be tailored to each user.

The ringer Volume Control has three settings: OFF, LOW, and HIGH. It is suggested that you set the volume control to high when you first start using your Walker Clarity. To do this, slide the ringer volume control toward the wide end of the wedge.

The ringer also has a Pitch Control that has three settings: LOW, MED, and HIGH. The low frequency is typically the easiest for people with partial hearing loss to hear. It is suggested that you set the pitch control to low (toward the narrow end of the wedge) when you start using the phone.

Warble Ringer Ringer

Rate Volume Pitch

Control Control

A lighted ringer works in conjunction with the low frequency ringer. It sends out a visual flashing alert every time a phone call is coming in. (This ringer will light up regardless of the setting on the ringer volume control.)

➤Warble Ringer

The warble rate, or speed of ring can be also be varied from Fast/Medium/Slow when AC power pack is installed.

➤Tone/Pulse Selection

The W-300 Phone can be used as either a TONE (touch dial) or PULSE (rotary dial) phone. Tone dialing is required for using special phone services such as long distance calling. Please check with your local phone company on certain types

of service.

Note for Users with Pulse/Rotary ser- vice only: Many automated answering systems used by banks, stores and gov- ernment agencies ask you to “Push 1 for service”, “Push 2 for the operator”, etc. You must switch the tone/pulse switch on the top edge of the phone to tone before responding to these prompts. In summary, dial the phone number you want to call in

I

S

H

13