Walker W-300 manual Nite Lite, Neck Loop/Auxillary Port, To Place or Receive a Call

WALKER W-300 FEATURES

➤Nite Lite

The Nite Lite feature illuminates the key pad and left most extra large storage button. The Nite Lite makes the keypad visable when the phone is hung up, allow- ing it to be easily located at night. The Nite Lite can be adjusted to OFF, LO and HIGH.

➤Neck Loop/Auxillary Port

The W-300 has a 3.5mm phono jack to use with a neck loop. The volume to the neck loop is controlled with the Clarity Power Control. When the neck loop is plugged in, the receiver in the handset is disabled.

Once you have installed your Walker W-300 according to the instructions noted previously, it will be ready to use.

➤To Place or Receive a Call:

1.Adjust the Clarity Power ControlTM to its lowest setting (zero).

2.Pick up the handset and listen for the caller’s voice or a dial tone. Watch the

green sound level light located on the phone base, next to the program button. It should sign steady.

3.When placing a call, dial as you would any phone and wait for someone to answer.

4.Press the Boost Button

5.Adjust the Clarity Power ControlTM upwards to a level where the other party’s voice is heard loud and clear, and begin conversation.

6.When you complete the call, return the handset to the base unit.

7.After hanging up, the sound level will reset to normal level.

8.Pressing the Boost Button during subsequent conversations will return the volume to your set sound level.

Note: If you made an error while dialing, just depress the hookswitch, listen for a dial tone, and dial again.

16 Walker W-300