Avaya 4612 manual IP Telephone Management Features, Interpreting Ringer Tones

IP Telephone Management Features 7

Introduction

This chapter explains how to interpret both the different ringer tones you hear and the telephone’s indicator lights. Also covered are testing your telephone to be sure it is operating properly, and personalizing your phone’s ringing pattern.

Interpreting Ringer Tones

As you become more familiar with your IP Telephone, you will recognize the various tones you hear in response to an incoming call or while using the handset. The chart below provides an overview of the tones you hear; check with your System Administrator to verify if the descriptions are accurate for your system.

Ringing Tones accompany an incoming call. Feedback Tones (as shown on the next page) are those which you hear through the handset (receiver) or the speaker.

Ringing (Incoming)
Tones		Meaning
1	Ring --------	Call from another extension.
2	Rings ------- -------	Call from outside or the System Administrator.
3	Rings ------ ------ ------	Priority call from another extension, or from an Automatic
		Callback call you placed.
Half Ring (ring-ping) ---		A call is being redirected from your phone to another
		because Send All Calls or Call Forwarding All Calls is
		active.

Issue 1 July 2001 7-1