Avaya 4612 manual Personalizing Your Telephones Ringing Pattern, Interpreting Indicator Lights

Personalizing Your Telephone's Ringing Pattern

Personalizing Your Telephone's

Ringing Pattern

The Select Ring feature lets you choose your own personalized ringing pattern from among eight different patterns.

Selecting a personalized ringing pattern

1.With the phone on-hook, press Conf.

The current ringing pattern sounds and repeats every three seconds.

2.Continue to press (and then release) Conf to cycle through each of the eight ring patterns.

3.To save a ringing pattern as it plays, do not continue to press Conf. You hear the selected ringing pattern two more times, after which it is automatically saved.

A confirmation tone (two rising tones) sounds and your new ringing pattern is set.

NOTE:

Going off-hook, receiving a call or losing power during ring pattern selection interrupts the process, and you must start over from Step 1.

Interpreting Indicator Lights

As you become more familiar with your IP Telephone, you will recognize the lights associated with a Line/Feature button. The chart below provides an overview of the indicator lights you see; check with your System Administrator to verify if the descriptions are accurate for your system.

Light	Meaning
Steady Red	The line is available.
Steady Green	Indicates the line is in use or the
	feature programmed for that button is
	on (active).
Blinking Green	Indicates a call is on hold on this line.
Flashing Green	An incoming call is arriving on this
	line.
Fluttering Green	This line's call was put on hold
	pending a conference or a transfer.

Issue 1 July 2001 7-3