Avaya 4612 manual

Characters do not appear on	See "Phone does not activate after
the Display screen	connecting it the first time" above.
	Check the power source to be sure your
	telephone is receiving power.
	Check all lines into the phone to be sure it
	is properly connected.
	Perform the Test procedure: with the
	telephone idle, press and hold the Trnsfr
	button; the line/feature indicators should
	light and the display should show all
	shaded blocks. Release the Trnsfr button
	to end the test.
	If the above suggested solutions do not
	resolve the problem, reset or power cycle
	the phone.
Display shows an	Most messages involve server/phone
error/informational message	interaction. If you cannot resolve the
	problem based on the message received,
	contact your Telephone System
	Administrator for resolution.
No dial tone	Make sure both the handset and line cords
	into the phone are securely connected.
	Note that there may be a slight operational
	delay if you unplug and reconnect the
	phone.
	If you have a 4612 or 4624 IP Telephone,
	check to be sure the phone is powered
	(press Menu, then Exit); if nothing
	appears on the display, check your power
	source.
	If you have a 4612 or 4624 IP Telephone,
	check to be sure your phone is
	communicating with the switch; press
	Menu, then any of the softkey features
	(e.g., Timer). If the selected feature
	activates, the switch/IP phone connection
	is working.
	Reset or power cycle the phone.
	See your Telephone System Administrator
	if the above steps do not produce the
	desired result.

9-2Issue 1 July 2001