NEC 1093098 manual Charts

			Charts
	DSX Dial Codes by Feature (Page 2 of 2)
For this feature		Dial this code	When you are
Monitor / Silent Monitor		6	Setting up Monitor after calling a busy
			co-worker
Night Service / Night Ring		** + UNA code (01-04)	Answering a call ringing UNA at
			night
Paging		INTERCOM + *1 + Page zone (1-7 or	Making an internal Paging announce-
		0 for All Call)	ment
Park		INTERCOM + * + System Park Orbit	Parking or retrieving a call from Sys-
		(60-69)	tem Park Orbit
		INTERCOM + ** + Extension (e.g.,	Using Personal Park to Park or
		301)	retrieve a call at a co-workers exten-
			sion
Removing Lines and Extensions		INTERCOM + #40 + Extension (e.g.,	Removing or returning an extension
From Service		301) or line (e.g., 101) + 4 (to return)	or line to service
		or 6 (to remove)
Selectable Display Messaging		INTERCOM + *38 + Message (00-16)	Enabling a Selectable Display Mes-
		+ Hold + Add additional digits + Hold	sage
Speed Dial		INTERCOM + # + System bin (201-	Dialing a System or Personal Speed
		299) or Personal bin (701-720)	Dial number
Transfer		INTERCOM + Extension (e.g., 301)	Transferring a call to a co-worker’s
			extension
		INTERCOM + Extension (e.g., 301) +	Transferring a call to a co-worker’s
		V-MAIL	mailbox
Line Queuing / Line Callback		2	Queuing or leaving a Callback for a
			busy line
Voice Mail		INTERCOM + V-MAIL	Calling your mailbox from your key-
			set
		Lift handset + *8	Calling your mailbox from your single
			line telephone
		INTERCOM + Extension (e.g., 301) +	Transferring a call to a co-worker’s
		V-MAIL	mailbox from your keyset
		Hookflash + Extension (e.g., 301) + 8	Transferring a call to a co-worker’s
			mailbox from your single line telephone
		INTERCOM + *37 + 2 (all calls) or 8	Setting up Personal Answering
		(outside calls)	Machine Emulation
		INTERCOM + *30	Canceling Personal Answering
			Machine Emulation
Voice Over		9	Initiating a Voice Over to a busy
			extension (after hearing busy/ring
			tone)

DSX Feature Handbook Introduction ◆ 3

Introduction