2.4 Headset Working
When a headset is to be used on your phone, it must be plugged in to the headset socket on the base of your phone. To
activate the headset and switch off the handset, press 
HEADSET. The lamp beside the button is illuminated when Headset Working is activated.
To answer an incoming call:
1.Press 
HEADSET.
If you are already on a call:
1.Place the first call on hold
2.Press 
next to the flashing bell icon (
).
To clear a headset call:
∙Press 
HEADSET.
or
∙Press 
DROP.
To manually make a call:
1.Press 
HEADSET.
2.Dial the number (remember to include the required access code for an outside line) and listen to the progress of the call.
To automatically make a call:
1.Press 
HEADSET.
2.Then do any of the following:
·Press 
REDIAL and select from (up to) one of the last ten numbers that you dialed by pressing the associated Call Appearance key. The call is made automatically for you. (See Redial 18 )
or
·Access the Call Log and initiate a call to a specific entry. See Making Calls from the Call Log
32.
or
·Access the Speed Dial List in your personal directory and initiate a call to a specific entry. See Dialling a Speed Dial Number 26 .
2410/5410 Phone | Page 16 |
IP Office |