6.5 Using Self Test
Self Test can be used to display information about the phone and to check operation of the lamps and display. The information may be required by your system administrator.
To perform a self test:
1.To exit any other mode, press 
EXIT and then press any 
below the display.
2.Press 
Option.
3.Press 
Self Test. A screen of information is displayed.
Caution
In the top row, the center of the display should show REL:2.00 or higher. If not the phone’s software needs to be upgraded. Consult your system administrator.
4.Press and hold 
Test. The screen lines should all go black and all the phone lamps should come on. If they do not ,consult your system administrator.
5.Release 
Test and do one of the following:
∙To return to the options menu, press 
Done. or
∙To return to the call handling screen, press 
EXIT.
6.6 Language
When the phone is first installed, it is set to display screen text in English. You can select the language that you would prefer from the following:
English, German (Deutsch), French (Français), Spanish (Español), Italian (Italiano), Dutch (Nederlands), Portuguese (Português) or Japanese (Katakana characters).
Note
∙This does not alter your user language setting on the phone system.
To change the language:
1.To exit any other mode, press 
EXIT and then press any 
below the display.
2.Press 
Option.
3.Press 
Language. A menu listing the available languages appears, with the current language underlined.
4.Press 
or 
next to the language required. The screen text changes to the language selected.
5.Do one of the following:
∙To save the settings and return to the Options menu, press 
Save. You will hear a confirmation tone. or
∙To return to the options menu without saving any changes, press 
Cancel. or
∙To return to the call handling screen without saving any changes, press 
EXIT.
2410/5410 Phone | Page 44 |
IP Office |