1. Your phone may show 10/100/1000.
Adjusting the Footstand
To change the angle of the phone base, adjust the footstand while pressing the footstand button.
Adjusting the Handset Rest
When you connect your phone, you can adjust the handset rest to ensure that the receiver will not slip out of the cradle. See the table below for instructions.
123
77354
1
2
3
Set the handset aside and pull the square plastic tab from the handset rest.
Rotate the tab 180 degrees.
Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the handset to the handset rest.
Registering with TAPS
After your phone is connected to the network, your system administrator might ask you to
To register with TAPS, pick up the handset, enter the TAPS extension provided by your system administrator, and follow the voice prompts. You might need to enter your entire extension, including the area code. After your phone displays a confirmation message, hang up. The phone will
Headset Information
To use a headset, connect it to the headset port on the back of your phone.
Although Cisco Systems performs some internal testing of
14 |
|