Panasonic S-ICX manual Large-display phone features

1. Understanding Your Phone

Table 3. Large-display phone features

#	Feature		Description
1	Message Waiting Indicator	Indicates that you have a message.
2	Display	Displays information about the phone’s status,
		menus, and dialling directories.
3	Soft Keys	Used to select menus, directories, speed dial num-
		bers, and to access call-handling features.
4	PROG Key	Used to program FF and one-touch keys, to adjust
		ringer volume and to send a flash signal. Depending
		on the setup of your system, may also be used to
		transfer calls.
5	CONF Key	Used to establish conference calls and to check
		Flexible Function (FF) and one-touch key settings.
6	MIC Key	Used to activate/deactivate the Microphone/Mute
		function. When activated, the party on the other end
		can hear you. (See item 13, MIC Indicator.)
7	MENU Key	Used to return to the default Main Menu screen
		which contains the following items:
		•	Personal Dial
		•	System Dial
		•	Extension
		•	Function System
		•	Function Ext
8	PREV Key	Used to return to the previous screen.
9	NEXT Key	Used to advance to the next screen.
10	Flexible Function (FF)	Used to access outside lines or to access system fea-
	Keys	tures.
11	DND/CF Indicator	Indicates that Do-Not-Disturb (DND) or Call For-
		warding is set.
12	INT Indicator	Lights when you are on a call and flashes when you
		hold a call.
13	MIC Indicator	Indicates that your voice is not muted (i.e., party on
		the other end can hear you). Goes off when your
		hands-free microphone is muted and flashes when
		your handset is muted.
14	ON/OFF Indicator	Lights when the ON/OFF key has been pressed.
15	FL/R Key	Used to end an outside call and to either restore out-
		side dial tone or switch to external dial tone status
		without hanging up the receiver.
16	REDIAL Key	Used to redial the last number dialled.

16 ICX (International), issued October 2000 ICX-50-750