Panasonic S-ICX Setting UP Flexible Function Keys, To adjust the display contrast of your phone

2. Setting Up Your Phone

OR

Enter 9, then 2 to adjust the intercom ring tone. (The phone produces a tone.)

4.Press the VOLUME key.

5.Press the ON/OFF key.

To adjust the display contrast of your phone

Note: This task requires a display phone.

1.While the phone is idle, press the # key.

2.Press the VOLUME key several times as needed.

SETTING UP FLEXIBLE FUNCTION KEYS

You can set up Flexible Function (FF) keys to initiate system features or to assign specific extension numbers.

Note: You cannot set up FF keys that are dedicated to outside lines. Contact your system administrator or ICX and ICXHD dealer to make changes to dedicated FF keys.

To set up FF keys

1.Pickup the handset or press the ON/OFF key.

2.Press the PROG key.

3.Press the FF key to be programmed.

4.Do one of the following:

	If . . .	Then . . .
You want one-key assess to a certain fea-		a. For a fixed dial code, press the REDIAL
ture:		key. For a flexible dial code, proceed to
Notes:		step b.
		b. Enter one of the dial codes listed in
•	You must enter a dial code when
		Appendix A, “Dial Code List” on page
	assigning features. (See Appendix A,
		95.
	“Dial Code List” on page 95.)
•	Not all dial codes can be stored in FF
	keys
**You want one-key access to a specific		Enter the extension number.
extension number, plus the ability to pick
up the extension’s calls and know when the
extension is busy:

22 ICX (International), issued October 2000 ICX-50-750