Panasonic S-ICX manual To insert a Enter/Press, Memory * 7, ORY *2 555-4143 Memory *2

2. Setting Up Your Phone

OR

• Enter the Speed Dial Set/Clear code (default = 710 (HK/UK) or 710#).

3.Enter the PSD bin number (80-99).

4.Enter the phone number you want to be speed-dialled (maximum length = 16 characters). Remember to include the Intercom Level or MCO Code level code depending on how the system is set up. (Refer to the following table.)

Table 5. Characters allowed when assigning PSD numbers

To insert a . . .	Enter/Press...
Digit or character	0, 1-9, *, #
Intercom Level*	MEMORY * #
MCO Code 9 (UK/HK), 0 (Taiwan, Malaysia, Indo-	MEMORY * 0
nesia) **
MCO Code 81**	MEMORY * 71
MCO Code 82**	MEMORY * 72
MCO Code 83**	MEMORY * 73
MCO Code 84**	MEMORY * 74
Pause	FL/R
DP - DTMF Code	MEMORY * *
SSD Code	MEMORY NN(N)
Hyphen (-)	PROG
Display Number (Start / Stop) ***	MEMORY * 2
DTMF Conversion After the Other Party Answers	MEMORY * 3 (Version 3.5
	and higher)

* Indicates that the digits that follow are either a feature access code or extension number. (Do not include if system is set for Intercom Level.)

** Indicates that the digits that follow are for an outside number. (Do not include if system is set for Trunk Level.)

***Indicates that the enclosed digits should not be displayed during dialling. Must precede and follow the digits that you do not want displayed. Example: MEM-

ORY *2 555-4143 MEMORY *2.

5.Press the HOLD key.

6.Replace the handset or press the ON/OFF key.

ICX-50-750 ICX (International), issued October 2000 27