Panasonic KX-TG1031 Caller’s recording time, Message alert, Call screening, Handset settings i OK

Answering System

If your telephone service provider cannot do this:

–Set this unit’s “Ring count” setting so that this unit’s answering system answers calls before the Voice Mail service of your telephone service provider does. It is necessary to check the ring count required to activate the Voice Mail service provided by your telephone service provider before changing this setting.

–Change the ring count of the Voice Mail service so that the answering system can answer the call first. To do so, consult your telephone service provider.

Caller’s recording time

You can change the maximum message recording time allotted to each caller. The default setting is “3 min”.

1{MENU}

2{V}/{^}: “Answering device” i {OK}

3{V}/{^}: “Settings” i{OK}

4{V}/{^}: “Recording time” i {OK}

5{V}/{^}: Select the desired setting.

6{OK} i{OFF}

Message alert

You can select whether or not the message indicator on the handset flashes slowly when new messages are recorded. The default setting is “Off”.

Important:

LIf there are new Voice Mail messages present (page 33), the message indicator also flashes slowly.

1{MENU}

2{V}/{^}: “Handset settings” i {OK}

3{V}/{^}: “Other settings” i {OK}

4{V}/{^}: “Message alert” i {OK}

5{V}/{^}: Select the desired setting.

6{OK} i{OFF}

Note:

LWhile message alert is on, battery operating time is shortened (page 11).

Call screening

This feature allows you to monitor a message from the handset’s speaker when the answering system is recording a message. The default setting is “On“.

1{MENU}

2{V}/{^}: “Answering device” i {OK}

3{V}/{^}: “Settings” i{OK}

4{V}/{^}: “Call screening” i {OK}

5{V}/{^}: Select the desired setting.

6{OK} i{OFF}

32For assistance, please visit http://www.panasonic.com/help