Panasonic KX-TG8561FX, KX-TG8551FX One touch eco mode, Display mode, Dialling mode

Page 16

Getting Started

2Enter the current date, month, and year.

a

Example: 15 July, 2012 15 07 12

R You can select the date format by pressing #:

–dd/mm/yy (date/month/year)

–yy/mm/dd

3Enter the current hour and minute. Example: 9:30

09 30

R You can select 24-hour or 12-hour clock format (“AM” or “PM”) by

pressing .

4 a M N

Note:

RThe date and time may be incorrect after a power failure. In this case, set the date and time again.

Dialling mode

If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”.

“Tone”: For tone dial service.

“Pulse”: For rotary/pulse dial service.

1 (middle soft key) #120 2 MbN: Select the desired setting.

3 a MN

One touch eco mode

When the handset is on the base unit, the base unit transmission power is reduced up to

99.9% if only one handset is registered. Even when the handset is not on the base unit or several handsets are registered, the base unit transmission power in standby mode can be reduced up to 90 % by activating one touch eco mode.

You can turn on/off one touch eco mode by just pressing MR/ECON. The default setting is “Normal”.

–When the one touch eco mode is on: “Low”

is temporarily displayed and is shown on the handset display instead of .

–When the one touch eco mode is off: “Normal” is temporarily displayed and goes off from the handset display.

Note:

RWhen there is another cordless phone nearby and it is in use, the base unit transmission power may not be reduced.

RActivating one touch eco mode reduces the range of the base unit in standby mode.

RIf you set the repeater mode to “On” (page 41):

–One touch eco mode is cancelled.

–“Eco Setup” is not shown in the display menu (page 30).

Display mode

You can select to display either a single item or multiple items on one screen at a time for the following features:

–handset main menu icons in function menu

–menu list, recorded message list*1, phonebook list, caller list, and redial list

*1 KX-TG8561 series: page 3 Select the desired setting:

–“Multi Items”: Multiple entries/all menu icons are shown on one screen at a time.

–“Single Item”: An entry/a menu icon is

shown on one screen in large characters at a time.

The default setting is “Multi Items”.

Using soft key (Temporarily switching the display mode)

You can temporarily switch the display mode

by pressing shown when viewing the lists or selecting menu icons.

Programming the display mode beforehand

1 (middle soft key) #192

16

TG8551_61FX_(en-en)_0427_ver021.16 16

2012/04/27 20:24:45

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Digital Cordless Answering System Digital Cordless PhoneThank you for purchasing a Panasonic product Table of Contents Accessory information Supplied accessoriesFeature differences Model compositionAdditional/replacement accessories Accessory itemExpanding your phone system Model numberGeneral information For your future referenceDeclaration of Conformity Attach your purchase receipt hereFor your safety Important safety instructions BatteryFor best performance Base unit location/avoiding noiseOther information Routine careFor business users in the European Union Do not use benzine, thinner, or any abrasive powderSpecifications Setting up Battery installationBattery charging ConnectionsIcon Battery level Battery levelOperation Operating time Controls HandsetBase unit Navigator keyDisplay Handset display itemsKX-TG8561 series MeaningHandset soft key icons LineUse Icon ActionScreen saver mode Turning the power on/offInitial settings Display languageOne touch eco mode Display modeDialling mode Programming the display mode beforehandMbN Select the desired setting. a Making calls Making a call using the redial listAnswering calls Useful features during a call Power back-up operation Key lockHandset equalizer Recording a telephone conversationMaking calls during a power failure When only 1 handset is registeredPhonebook Adding entriesCategories Changing category namesFinding and calling from a phonebook entry Scrolling through all entriesSearching by first character Searching by queryCopying phonebook entries Editing entriesErasing entries Chain dialCopying multi entries Copying all entriesTo copy to the personal phonebook MbN Copy All aSpeed dial Programmable settings Display the menu tree and direct command code tableSettings Number of Rings*2 Receive List Send List Create SettingsRinger Volume Handset Rings Auto Recording Time*2 MinuteNight Mode On/Off Ring Delay 30 secMemo Alarm Alarm1-5 Once Time Adjustment *2, *10 Caller IDRinger Setup Ringer Volume Handset Ringer VolumeNight Mode On/Off Night ModeDisplay Setup Wallpaper *11 Wallpaper1 Colour2 Display Mode Multi ItemsLine Setup Dial Mode *2 Pulse 2 Tone Msec # 160 msec Privacy Mode *2, *17Power Failure Auto Language DisplayEnglish Sensitivity LevelAlarm Special programmingČeská rep. = 100 msec. Slovensko = 100 msec OnceNight mode Changing the handset nameSetting call restriction Incoming call barring Caller ID subscribers onlyChanging the base unit PIN Personal Identification Number Storing unwanted callersChanging the unit’s region setting/Resetting the base unit Calendar/ScheduleAdding a new entry Česká rep. = Czech Slovensko = SlovakiaMbN Select the desired alarm tone. a Times Baby monitorViewing entries Editing an entrySetting the baby monitor To monitor with a handsetTo monitor from an outside line Turning off the baby monitorAnswering the baby monitor Registering a unitOperating additional units Cancelling a base unit Registering a handset to a base unitSelecting a base unit Deregistering a handsetSetting the repeater mode Increasing the range of the base unitDo not use more than one repeater at a time Dect repeaterUsing Caller ID service Caller ID featuresCaller list Category ringer toneViewing the caller list and calling back Editing a caller’s phone number before calling backErasing selected caller information Erasing all caller informationUsing SMS Turning SMS on/offStoring SMS message centre numbers Sending a messageReceiving a message Editing/sending a saved messageErasing saved messages Reading a received messageOther settings Answering system Turning the answering system on/offGreeting message Memory capacity including your greeting messageListening to messages using the base unit Listening to messages using the handsetRecording your greeting message Playing back the greeting messageRemote operation Listening to messages from the message listOperating the answering system Calling back Caller ID subscribers onlyAnswering system settings For voice mail service subscribers Middle soft key #211 MbN Select the desired setting. aIf your service provider/telephone company cannot do this Caller’s recording timeVoice mail service Handset locator IntercomTransferring calls, conference calls When the unit displays the character entry screen Character entryCharacter entry modes Alphabet character table ABCGreek character table Extended 1 character tableFollowing are used for both uppercase and lowercase Extended 2 character table Not available for SMSTG855161FXen-en0427ver021.56 2012/04/27 Cause/solution Error messagesDisplay message Troubleshooting Programmable settingsProblem General useBattery recharge Making/answering calls, intercomSMS Short Message Service Caller IDCannot make a call FD is displayed FE is displayedLiquid damage Answering systemE0 is displayed Belt clip To attachIndex FX-2/3 Sales Department Czech SlovakiaRomania PNQX5210ZA TT0412KM0 a
Top Page Image Contents