Panasonic KX-TG8561FX Using SMS, Turning SMS on/off, Storing SMS message centre numbers

Page 44

SMS (Short Message Service)

Using SMS

SMS allows you to send and receive text messages between other fixed-line and mobile phones that support compatible SMS networks and features.

Important:

RTo use SMS features, you must:

subscribe to a Caller ID and/or an appropriate service such as SMS.

confirm that SMS is turned on.

confirm that the correct message centre numbers are stored.

Contact your service provider/telephone company for details and availability.

Note:

RA total of 47 messages (at 160 characters/ message) can be saved. Total number may be more than 47 if length of messages is less than 160 characters/message.

RIf the unit is connected to a PBX system, you may not be able to use SMS features.

Turning SMS on/off

1 (middle soft key) #357

2MbN: Select the desired setting. a

a MN

Storing SMS message centre numbers

SMS message centre numbers must be stored in order to send and receive SMS messages.

For Czech:

The message centre numbers (used for SMS services provided by Telefonica O2) are preprogrammed in this unit. You can change them if necessary.

For Slovakia:

The message centre numbers (used for SMS service provided by Slovak Telecom - T-Com) are preprogrammed in this unit. You can change them if necessary.

RContact your service provider/telephone company for more information.

RIf you change the unit’s region setting/reset the base unit, the stored message centre numbers will be deleted or changed (page 28). In this case, store the numbers again if necessary.

1To store “Message Centre1”:

(middle soft key) #351

To store “Message Centre2”:

(middle soft key) #352

2Edit the number as necessary. a

a MN

Note:

RFor PBX users:

You need to add the PBX line access number and a dialling pause to the beginning of the Message Centre 1 number.

If you only use the Message Centre 1 number for SMS, store the Message Centre 1 number as is (without adding a line access number or dialling pause) to Message Centre 2.

Sending a message

Writing and sending a new message

1 (middle soft key) a a

2MbN: Createa

R If “DUse Last Text?is displayed, you can use the text from the last message you created by pressing MDN.

3Enter a message. a

R You can change the character entry

mode by pressing (page 54).

4Enter the destination phone number (20

digits max.). a

To use the redial list:

MEN (T) a MbN: Select the phone

number. a 2 times

To use the caller list:

44

TG8551_61FX_(en-en)_0427_ver021.44 44

2012/04/27 20:24:47

Image 44
Contents Thank you for purchasing a Panasonic product Digital Cordless PhoneDigital Cordless Answering System Table of Contents Accessory information Supplied accessoriesFeature differences Model compositionAdditional/replacement accessories Accessory itemExpanding your phone system Model numberGeneral information For your future referenceDeclaration of Conformity Attach your purchase receipt hereFor your safety Important safety instructions BatteryFor best performance Base unit location/avoiding noiseOther information Routine careFor business users in the European Union Do not use benzine, thinner, or any abrasive powderSpecifications Setting up Battery installationBattery charging ConnectionsOperation Operating time Battery levelIcon Battery level Controls HandsetBase unit Navigator keyDisplay Handset display itemsKX-TG8561 series MeaningHandset soft key icons LineUse Icon ActionScreen saver mode Turning the power on/offInitial settings Display languageOne touch eco mode Display modeDialling mode Programming the display mode beforehandMbN Select the desired setting. a Answering calls Making a call using the redial listMaking calls Useful features during a call Power back-up operation Key lockHandset equalizer Recording a telephone conversationMaking calls during a power failure When only 1 handset is registeredPhonebook Adding entriesCategories Changing category namesFinding and calling from a phonebook entry Scrolling through all entriesSearching by first character Searching by queryCopying phonebook entries Editing entriesErasing entries Chain dialCopying multi entries Copying all entriesTo copy to the personal phonebook MbN Copy All aSpeed dial Programmable settings Display the menu tree and direct command code tableSettings Number of Rings*2 Receive List Send List Create SettingsRinger Volume Handset Rings Auto Recording Time*2 MinuteNight Mode On/Off Ring Delay 30 secMemo Alarm Alarm1-5 Once Time Adjustment *2, *10 Caller IDRinger Setup Ringer Volume Handset Ringer VolumeNight Mode On/Off Night ModeDisplay Setup Wallpaper *11 Wallpaper1 Colour2 Display Mode Multi ItemsLine Setup Dial Mode *2 Pulse 2 Tone Msec # 160 msec Privacy Mode *2, *17Power Failure Auto Language DisplayEnglish Sensitivity LevelAlarm Special programmingČeská rep. = 100 msec. Slovensko = 100 msec OnceNight mode Changing the handset nameSetting call restriction Incoming call barring Caller ID subscribers onlyChanging the base unit PIN Personal Identification Number Storing unwanted callersChanging the unit’s region setting/Resetting the base unit Calendar/ScheduleAdding a new entry Česká rep. = Czech Slovensko = SlovakiaMbN Select the desired alarm tone. a Times Baby monitorViewing entries Editing an entrySetting the baby monitor To monitor with a handsetTo monitor from an outside line Turning off the baby monitorOperating additional units Registering a unitAnswering the baby monitor Cancelling a base unit Registering a handset to a base unitSelecting a base unit Deregistering a handsetSetting the repeater mode Increasing the range of the base unitDo not use more than one repeater at a time Dect repeaterUsing Caller ID service Caller ID featuresCaller list Category ringer toneViewing the caller list and calling back Editing a caller’s phone number before calling backErasing selected caller information Erasing all caller informationUsing SMS Turning SMS on/offStoring SMS message centre numbers Sending a messageReceiving a message Editing/sending a saved messageErasing saved messages Reading a received messageOther settings Answering system Turning the answering system on/offGreeting message Memory capacity including your greeting messageListening to messages using the base unit Listening to messages using the handsetRecording your greeting message Playing back the greeting messageRemote operation Listening to messages from the message listOperating the answering system Calling back Caller ID subscribers onlyAnswering system settings For voice mail service subscribers Middle soft key #211 MbN Select the desired setting. aIf your service provider/telephone company cannot do this Caller’s recording timeVoice mail service Transferring calls, conference calls IntercomHandset locator When the unit displays the character entry screen Character entryCharacter entry modes Alphabet character table ABCGreek character table Extended 1 character tableFollowing are used for both uppercase and lowercase Extended 2 character table Not available for SMSTG855161FXen-en0427ver021.56 2012/04/27 Display message Error messagesCause/solution Troubleshooting Programmable settingsProblem General useBattery recharge Making/answering calls, intercomSMS Short Message Service Caller IDCannot make a call FD is displayed FE is displayedE0 is displayed Answering systemLiquid damage Belt clip To attachIndex FX-2/3 Sales Department Czech SlovakiaRomania PNQX5210ZA TT0412KM0 a