Panasonic KX-TG8551FX Important safety instructions, For best performance, Battery, Environment

Page 7

Important Information

RThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.

RThis product is unable to make calls when:

the handset batteries need recharging or have failed.

there is a power failure.

the key lock feature is turned on.

Battery

RWe recommend using the batteries noted on page 4. USE ONLY rechargeable

Ni-MH batteries AAA (R03) size.

RDo not mix old and new batteries.

RDo not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.

RExercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.

RCharge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual.

ROnly use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode.

Important safety instructions

When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1.Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.

2.Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electric shock from lightning.

3.Do not use the telephone to report a gas leak in the vicinity of the leak.

4.Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

For best performance

Base unit location/avoiding noise

The base unit and other compatible Panasonic units use radio waves to communicate with each other.

RFor maximum coverage and noise-free communications, place your base unit:

at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment.

away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones.

facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.)

RCoverage and voice quality depends on the local environmental conditions.

RIf the reception for a base unit location is not satisfactory, move the base unit to another location for better reception.

Environment

RKeep the product away from electrical noise generating devices, such as fluorescent lamps and motors.

RThe product should be kept free from excessive smoke, dust, high temperature, and vibration.

RThe product should not be exposed to direct sunlight.

RDo not place heavy objects on top of the product.

7

TG8551_61FX_(en-en)_0427_ver021.7 7

2012/04/27 20:24:45

Image 7
Contents Digital Cordless Answering System Digital Cordless PhoneThank you for purchasing a Panasonic product Table of Contents Model composition Accessory informationSupplied accessories Feature differencesModel number Additional/replacement accessoriesAccessory item Expanding your phone systemAttach your purchase receipt here General informationFor your future reference Declaration of ConformityFor your safety Base unit location/avoiding noise Important safety instructionsBattery For best performanceDo not use benzine, thinner, or any abrasive powder Other informationRoutine care For business users in the European UnionSpecifications Connections Setting upBattery installation Battery chargingIcon Battery level Battery levelOperation Operating time Navigator key ControlsHandset Base unitMeaning DisplayHandset display items KX-TG8561 seriesIcon Action Handset soft key iconsLine UseDisplay language Screen saver modeTurning the power on/off Initial settingsProgramming the display mode beforehand One touch eco modeDisplay mode Dialling modeMbN Select the desired setting. a Making calls Making a call using the redial listAnswering calls Useful features during a call Recording a telephone conversation Power back-up operationKey lock Handset equalizerWhen only 1 handset is registered Making calls during a power failureChanging category names PhonebookAdding entries CategoriesSearching by query Finding and calling from a phonebook entryScrolling through all entries Searching by first characterChain dial Copying phonebook entriesEditing entries Erasing entriesMbN Copy All a Copying multi entriesCopying all entries To copy to the personal phonebookSpeed dial Display the menu tree and direct command code table Programmable settingsRings Auto Recording Time*2 Minute Settings Number of Rings*2Receive List Send List Create Settings Ringer Volume HandsetTime Adjustment *2, *10 Caller ID Night Mode On/OffRing Delay 30 sec Memo Alarm Alarm1-5 OnceOn/Off Night Mode Ringer Setup Ringer VolumeHandset Ringer Volume Night ModeMsec # 160 msec Privacy Mode *2, *17 Display Setup Wallpaper *11 Wallpaper1Colour2 Display Mode Multi Items Line Setup Dial Mode *2 Pulse 2 ToneSensitivity Level Power Failure AutoLanguage Display EnglishOnce AlarmSpecial programming Česká rep. = 100 msec. Slovensko = 100 msecChanging the handset name Night modeStoring unwanted callers Setting call restrictionIncoming call barring Caller ID subscribers only Changing the base unit PIN Personal Identification NumberČeská rep. = Czech Slovensko = Slovakia Changing the unit’s region setting/Resetting the base unitCalendar/Schedule Adding a new entryEditing an entry MbN Select the desired alarm tone. a TimesBaby monitor Viewing entriesTurning off the baby monitor Setting the baby monitorTo monitor with a handset To monitor from an outside lineAnswering the baby monitor Registering a unitOperating additional units Deregistering a handset Cancelling a base unitRegistering a handset to a base unit Selecting a base unitDect repeater Setting the repeater modeIncreasing the range of the base unit Do not use more than one repeater at a timeCategory ringer tone Using Caller ID serviceCaller ID features Caller listErasing all caller information Viewing the caller list and calling backEditing a caller’s phone number before calling back Erasing selected caller informationSending a message Using SMSTurning SMS on/off Storing SMS message centre numbersReading a received message Receiving a messageEditing/sending a saved message Erasing saved messagesOther settings Memory capacity including your greeting message Answering systemTurning the answering system on/off Greeting messagePlaying back the greeting message Listening to messages using the base unitListening to messages using the handset Recording your greeting messageCalling back Caller ID subscribers only Remote operationListening to messages from the message list Operating the answering systemAnswering system settings Caller’s recording time For voice mail service subscribersMiddle soft key #211 MbN Select the desired setting. a If your service provider/telephone company cannot do thisVoice mail service Handset locator IntercomTransferring calls, conference calls Alphabet character table ABC When the unit displays the character entry screenCharacter entry Character entry modesExtended 2 character table Not available for SMS Greek character tableExtended 1 character table Following are used for both uppercase and lowercaseTG855161FXen-en0427ver021.56 2012/04/27 Cause/solution Error messagesDisplay message General use TroubleshootingProgrammable settings ProblemMaking/answering calls, intercom Battery rechargeFD is displayed FE is displayed SMS Short Message ServiceCaller ID Cannot make a callLiquid damage Answering systemE0 is displayed To attach Belt clipIndex PNQX5210ZA TT0412KM0 a FX-2/3Sales Department Czech Slovakia Romania