Programming
Increasing the range of the base unit
You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 4. Contact your Panasonic dealer for details.
Important:
RBefore registering the repeater to this base unit, you must turn the repeater mode on.
RDo not use more than one repeater at a time.
Setting the repeater mode
1 (middle soft key) #138
2MbN: Select the desired setting. a
a MN
Note:
RAfter turning the repeater mode on or off,
is displayed on the handset momentarily. This is normal and the
handset can be used once is displayed.
Registering the DECT repeater (KX-A405) to the base unit
Note:
RPlease use a repeater that has not yet been registered to another unit. If the repeater is registered to another unit, deregister it first, referring to the Installation Guide for the DECT repeater.
1Base unit:
Proceed with the operation for your model.
n
n
R The next step must be completed within 90 seconds.
2DECT repeater:
Connect the AC adaptor, then wait until
the indicator and indicator light green.
3Base unit:
To exit the registration mode, press MN. R The registration tone stops.
41
2012/04/27 20:24:47