Panasonic KX-TG6542BX Using the base unit, Erasing a number in the redial list, Ipause, Sp-Phone

{C}

3

{V}/{^}: Select the desired phone number.

2

{REDIAL} or {4} REDIAL

L If there is a new message in the voice mail or answering system, {REDIAL} is not displayed.

1

Making calls

Using the handset

1 Lift the handset and dial the phone number.

L To correct a digit, press {CLEAR}.

2 Press {C} or {CALL}.

3 When you finish talking, press {OFF} or place the handset on the base unit or charger.

Using the speakerphone

1 Dial the phone number and press {s}.

L Speak alternately with the other party.

2 When you finish talking, press {OFF}.

Note:

L For best performance, use the speakerphone in a quiet environment.

L To switch back to the receiver, press {C}.

Adjusting the receiver or speaker volume

Press {^} or {V} repeatedly while talking.

Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (each 48 digits max.).

TG654xBX(e).book Page 13 Tuesday, June 28, 2011 10:16 AM

Making/Answering Calls

Erasing a number in the redial list

1{REDIAL} or {4} REDIAL

2{V}/{^}: Select the desired phone number. i{ERASE}

3{V}/{^}: “Yes” i{SELECT}

4{OFF}

Pause (for PBX/long distance service users)

A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 19).

Example: If you need to dial the line access number “9” when making outside calls with a PBX:

1{9} i{PAUSE}

2Dial the phone number. i{C}

Note:

L A 3.5 second pause is inserted each time {PAUSE} is pressed. Repeat as needed to create longer pauses.

Using the base unit

1{SP-PHONE}

2Dial the phone number.

3When the other party answers, speak into the microphone.

L Speak alternately with the other party.

4When you finish talking, press {SP- PHONE}.

Note:

L For best performance, use the speakerphone in a quiet environment.

L While on a call, you can switch from the base unit to the handset:

–Press {C} on the handset, then press {SP-PHONE} on the base

13