2. Setting Up Your Phone
OR
• Enter the Speed Dial Set/Clear code (default = 710).
3.Enter the PSD bin number
4.Enter the phone number you want to be
Table 5. Characters allowed when assigning PSD numbers
To insert a . . . | Enter/Press... |
|
|
Digit or character | 0, |
|
|
Intercom Level* | AUTO * # |
|
|
MCO Code** | AUTO * 0 |
|
|
Pause | REDIAL |
|
|
DP - DTMF Code | AUTO * * |
|
|
SSD Code | AUTO |
| NN(N) |
Hyphen | PROG |
checked, but not during programming) |
|
Display Number (Start/Stop) *** | AUTO * 2 |
|
|
DTMF Conversion After the Other Party Answers | AUTO * 3 (Version 2.5 and |
| higher) |
Hyphen |
|
checked, but not during programming.) |
|
* Indicates that the digits that follow are either a feature access code or extension number. (Do not include if system is set for Intercom Level.)
** Indicates that the digits that follow are for an outside number. (Do not include if system is set for CO Level.)
** Indicates that the enclosed digits should not be displayed during dialing. Must pre- cede and follow the digits that you do not want displayed. Example: AUTO*2 555- 4143 AUTO*2
5.Press the HOLD key.
6.Replace the handset or press the ON/OFF key.
To delete a PSD number assigned to a one-touch or soft key
Note: When deleting a PSD number from a
DBS 576 (USA), issued October 2000 | 27 |