2. Setting Up Your Phone
To set the Exception Day Modes using either a large- display or
1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2.Enter: 07, press HOLD, enter: 2, and press HOLD HOLD.
3.Enter: Start Date by Month - two characters and Day - two characters for Exception Period 1 and press HOLD to store the entry.
Note: To clear an entry or existing data, press the FLASH key.
4.To set additional Exception Day modes, press the VOLUME up or down arrow or HOLD to move to the desired mode.
5.Repeat steps
6.Press AUTO PROG to return to
OR...
Press AUTO ON/OFF to exit User Maintenance.
To set the Mode Schedule using either a
1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2.Enter: 07, and press HOLD HOLD HOLD.
3.Enter: Start Time in Hours (two characters) and Minutes (two characters) for Pattern 1 - first mode and press HOLD.
Notes: To clear an entry or existing data, press the FLASH key.
4.Enter: Desired Mode for Pattern 1 - first (0 - None, 1 - Day 1,
2 - Day 2, 3 - Night, 4 - Night 1, 5 - Night 2) and press HOLD to
store the entry.
Note: To clear an entry or existing data, press the FLASH key.
5.To set additional mode schedules, press the VOLUME up or down arrow or HOLD to move to the desired mode.
6.Repeat steps
Note: Entry Positions are listed in Chapter 4 of Section 700 - Feature Operations.
7.Press AUTO PROG to return to
OR...
Press AUTO ON/OFF to exit User Maintenance.
DBS 576 (USA), issued October 2000 | 39 |