Orion LBI-38888K manual Alm, Primary Functions Quick Access

Page 13

iUsed to call individual or make an all-call by selecting the individual call function. See Individual Calls for details.

EThis key function is used to declare emergencies.

ALM	Toggles the external alarm ON/OFF. The external alarm is
	used to indicate the radio is receiving an Individual Call.
	Press the key once to enable external alarm and press again
	to disable external alarm.
SG1-SG5	Corresponds to five (5) pre-programmed System/Groups.
	Pressing a key programmed for SG1 would switch the radio
	to the pre-programmed System/Group 1. Pressing a key
	programmed for SG2 would switch the radio to the pre-
	programmed System/Group 2, etc.
WAIL, YLP,	The WAIL and YLP (Yelp) keys are designed to control an
RST, SL1-	optional Siren package. The SL1-SL8(Siren/Light) keys
SL8	are designed to control an optional Siren/Light package.
	The RST (Reset) key is used to turn all sirens and lights
	OFF.
SPK	This key function is used to toggle the external speaker
	ON/OFF.
STO-ST9	The status 0-9 keys are used to send pre-programmed status
	message to the EDACS site.
PVT	Enables or disables Private Mode for the System/Group
	displayed. See the PRIVATE OPERATION section.
KEY	Displays the Encrypted Keys. This selects the DISP KEY
	operation from the menu functions.
G*	This key function is used in Conventional Mode to send
	G-STARemergency signalling.
PA	This key function enables and disables the Public Address
	feature.

#DTMF keypad function.

1-9	Keypad numbers.

*DTMF Keypad function.

Primary Functions (Quick Access)

The secondary function of the k button is to toggle the keypad buttons between their primary function and their secondary function. When the secondary keypad is active, i.e. entering phone digits for an interconnect call, the k button can be used to toggle the keypad buttons back to their primary function, perform a task (siren/light enable), and then toggle back

13

Image 13

Contents Orion Product Specification for CE Marked Equipment Table of Contents Table of Contents List of the possible hazards are Explosive Atmospheres Safety InformationInterference To Vehicular Electronic Systems Dynamite Blasting CapsUser Interface IntroductionOrion Mobile Radio System Model Front Panel Controls Power ON-OFF Volume KnobSYSTEM/GROUP Channel Knob Ramp Control IndicatorsScan ON/OFF Scan ADD/DELETEOrion System Model Keypad KeypadOptional Keycap Configuration Standard Keycap ConfigurationKey Descriptions Entry see Selection Mode Rules ALM Primary Functions Quick AccessRadio Status Icons DisplayMessage Name Description MessagesTX Data WHC=1 FIX List Spkr on Call Queued Trunked Mode only Autokey Trunked Mode onlySystem Busy Trunked Mode only Alert TonesCarrier Control Timer Call Denied Trunked Mode onlyDual Control Switching OperationTurning on the Radio Selection Mode RulesU T H Direct AccessMenu N U K L G H T Press SEL Menu Item Information Feature Display Parameter Comment Settings SYS Scan Feature Encryption Data Stream Feature Encryption DisplaySerial Number ROM 12 Hex Digits Example Number Fields Features EnabledBIT Fields Possible Features System Selection SYSTEM/GROUP/CHANNEL SelectionGroup And Channel Selection Receiving a Call Trunked Mode OperationSending a Call Emergency Operation Conventional FailsoftReceiving An Emergency Call Declaring An Emergency Call System Scan OperationWide Area System Scan ProScanTM ProSoundTMWhen ProSound/ProScan Is Enabled When Wide Area System Scan Is EnabledPriority System Scan Menu SelectionGroup Scan Operation Deleting Groups From a Scan List Adding Groups To a Scan ListTurning Scan on Nuisance DeletePriority Group Scanning Turning Scan OFF Individual CallsReceiving and Responding To An Individual Call Page Sending An Individual Call Scat OperationSending a Telephone Interconnect Call Trunked Mode Only Receiving a Telephone Interconnect Call Trunked Mode OnlyTelephone Interconnect Calls Dtmf Overdial/Conventional Mode Telephone Interconnect Programmable Entries Displays Mobile DataData On Operation Data OFF OperationExiting Data Calls Scan Lockout ModeSTATUS/MESSAGE Operation Data Lockout ModeStatus Operation Message Operation Edacs Conventional P1 ScanDynamic Regroup Operation Conventional Mode OperationEmergency Operation Receiving a Call Tone Encode Transmission Using 5-Tone Signalling for Emergency DeclarationScanning Conventional Channels Deleting Channels From a Scan List Adding Channels To a Scan ListTurning Scan OFF Turning Scan onSquelch Adjust Type 99 Decode Conventional Only Noise Blanker OperationMenu Selection Direct Mode Operation Conventional System Only SIREN/LIGHT Operation Trunked or Conventional Mode OperationVoice Modes Yes AEGIS/ProVoice Digital ModeClear Modes ERR=xxxx Error MessagesPage Displaying The Currently Used Cryptographic Key Number Transferring Keys Into The RadioPrivate Operation Receiving An Encrypted Call Key ZeroTransmitting An Encrypted Call Conventional Operation Outside Address Scanned Group CallsControl Switching Modes Switching ControlDual Control Operation Channel GuardIndependent Mode Operation Slaved Mode OperationSiren And Light Control Dual Control Audio Multiple Radio OperationChanging Selected Radio Shared Control Unit Display ModesAudio Modes First Come First Serve DisplayAudio Summed Audio First Come First ServeMacro KEY Operation Page Keypad Remapping Operating Rules and Regulations Glossary Site Group Or Subfleet Group Scan Individual Call QueueingController SystemTelephone Talk-aroundInter ConnectRadio Type Frequency Band Operators Name Emergency Group Operators Radio SetupWarranty Operating Tips Emergency Numbers