Orion LBI-38888K manual Programmable Entries

Page 47

METHOD 2: Press p to enter the overdial select/entry mode and follow the selection mode rules to call up a stored number from the phone list or to directly enter the overdial digits. Press PTT to send the overdial sequence once. If the number needs to be transmitted again it must be selected or entered again (this prevents unwanted numbers from being sent the next time the PTT button is pressed during the call).

This overdial select/entry mode remains active until the call

is dropped, cleared, or m is pressed. The overdial select/entry mode can be re-entered if the call is still active

by pressing p.

Programmable Entries

Individual call ID numbers, telephone numbers and other number sequences for overdialing are stored in the special call lists when programming the radio. The first ten entry locations of these lists can be changed by the radio operator. The keypad is used when adding, changing and storing numbers in these entry locations.

Use the following procedure to store a number in one of the first ten entries of a special call list:

1.Press ior pto enter the individual call list or the phone call list. The selection mode rules apply.

2.Scroll through the list using the RAMP control ,or . until one of the first ten entries is reached. NO ENTRY is displayed if the location is empty.

3.Enter the desired number. If necessary, a pause can be entered by pressing and holding 0-9, (*), or (#) until an underscore appears in the display. The individual call list entries will accept up to 5 digits. The phone call list entries accept a combination of up to 31 digits and pauses.

4.Press and hold muntil the display changes indicating that the number has been stored.

5.Repeat the steps above if the number stored in an entry location needs to be changed.

47

Image 47

Contents Orion Product Specification for CE Marked Equipment Table of Contents Table of Contents Dynamite Blasting Caps Safety InformationList of the possible hazards are Explosive Atmospheres Interference To Vehicular Electronic SystemsUser Interface IntroductionOrion Mobile Radio System Model Front Panel SYSTEM/GROUP Channel Knob Power ON-OFF Volume KnobControls Scan ADD/DELETE IndicatorsRamp Control Scan ON/OFFOrion System Model Keypad KeypadKey Descriptions Standard Keycap ConfigurationOptional Keycap Configuration Entry see Selection Mode Rules ALM Primary Functions Quick AccessRadio Status Icons DisplayMessage Name Description MessagesTX Data WHC=1 FIX List Spkr on Alert Tones Autokey Trunked Mode onlyCall Queued Trunked Mode only System Busy Trunked Mode onlyOperation Call Denied Trunked Mode onlyCarrier Control Timer Dual Control SwitchingTurning on the Radio Selection Mode RulesU T H Direct AccessMenu N U K L G H T Press SEL Menu Item Information Feature Display Parameter Comment Settings SYS Scan Serial Number ROM 12 Hex Digits Example Feature Encryption DisplayFeature Encryption Data Stream Number Fields Features EnabledBIT Fields Possible Features System Selection SYSTEM/GROUP/CHANNEL SelectionGroup And Channel Selection Sending a Call Trunked Mode OperationReceiving a Call Receiving An Emergency Call Conventional FailsoftEmergency Operation Wide Area System Scan System Scan OperationDeclaring An Emergency Call ProScanTM ProSoundTMMenu Selection When Wide Area System Scan Is EnabledWhen ProSound/ProScan Is Enabled Priority System ScanGroup Scan Operation Deleting Groups From a Scan List Adding Groups To a Scan ListPriority Group Scanning Nuisance DeleteTurning Scan on Receiving and Responding To An Individual Call Individual CallsTurning Scan OFF Page Sending An Individual Call Scat OperationTelephone Interconnect Calls Receiving a Telephone Interconnect Call Trunked Mode OnlySending a Telephone Interconnect Call Trunked Mode Only Dtmf Overdial/Conventional Mode Telephone Interconnect Programmable Entries Displays Mobile DataData On Operation Data OFF OperationExiting Data Calls Scan Lockout ModeSTATUS/MESSAGE Operation Data Lockout ModeStatus Operation Message Operation Edacs Conventional P1 ScanEmergency Operation Conventional Mode OperationDynamic Regroup Operation Receiving a Call Tone Encode Transmission Using 5-Tone Signalling for Emergency DeclarationScanning Conventional Channels Deleting Channels From a Scan List Adding Channels To a Scan ListTurning Scan OFF Turning Scan onSquelch Adjust Type 99 Decode Conventional Only Noise Blanker OperationMenu Selection Direct Mode Operation Conventional System Only Voice Modes Trunked or Conventional Mode OperationSIREN/LIGHT Operation Clear Modes AEGIS/ProVoice Digital ModeYes ERR=xxxx Error MessagesPage Displaying The Currently Used Cryptographic Key Number Transferring Keys Into The RadioTransmitting An Encrypted Call Key ZeroPrivate Operation Receiving An Encrypted Call Conventional Operation Outside Address Scanned Group CallsChannel Guard Switching ControlControl Switching Modes Dual Control OperationSiren And Light Control Slaved Mode OperationIndependent Mode Operation Shared Control Unit Display Modes Multiple Radio OperationDual Control Audio Changing Selected RadioAudio First Come First Serve First Come First Serve DisplayAudio Modes Audio SummedMacro KEY Operation Page Keypad Remapping Operating Rules and Regulations Glossary System Group Or Subfleet Group Scan Individual Call QueueingSite ControllerConnect Talk-aroundTelephone InterRadio Type Frequency Band Operators Name Emergency Group Operators Radio SetupWarranty Operating Tips Emergency Numbers