Orion LBI-38888K manual Messages, Message Name Description

Page 15

•indicates selected group or channel is in scan list.

•indicates selected group or channel is programmed as Priority 1 in scan list.

•indicates selected group or channel is programmed as Priority 2 in scan list.

•indicates conventional channel enabled with Channel Guard function.

•indicates the EDACS system is in failsoft mode (if enabled through programming).

•indicates Type 99 Decode is enabled on a conventional channel.

MESSAGES

During radio operation, various messages are displayed on either line one or line two. Typical messages include control channel status information, such as system busy or call denied, or messages associated with the radio's operation, (i.e. volume adjust). These messages are described as follows:

MESSAGE	NAME	DESCRIPTION
QUEUED	Call Queued	Trunked mode only. Indicates the system has
		placed the call in a request queue.
SYS BUSY	System Busy	Trunked mode only. Indicates the system is
		busy, no channels are currently available, the
		queue is full or an individual call is being
		attempted to a radio that is currently
		transmitting.
DENIED	Call Denied	Trunked mode only. Indicates the radio is not
		authorized to operate on the selected system.
CC SCAN	Control Channel Scan	Trunked mode only. Indicates the control
		channel is lost and the radio has entered the
		Control Channel Scan mode to search for the
		control channel.
WA SCAN	Wide Area Scan	Trunked mode only. Indicates the control
		channel is lost and radio has entered the Wide
		Area Scan mode to search for a new system
		(if enabled through programming).
TALKARND	Talk-around	Conventional mode only. Indicates the radio
		is operating on conventional channels in talk-
		around mode (no repeater).
RXEMER	Receive Emergency	Trunked mode only. Indicates an emergency
		call is being received. This message will be
		flashing on line two.
TXEMER	Transmit Emergency	Trunked mode only. Indicates an emergency
		call has been transmitted. This message will
		be flashing on line two.

15

Image 15

Contents Orion Product Specification for CE Marked Equipment Table of Contents Table of Contents Dynamite Blasting Caps Safety InformationList of the possible hazards are Explosive Atmospheres Interference To Vehicular Electronic SystemsUser Interface IntroductionOrion Mobile Radio System Model Front Panel Power ON-OFF Volume Knob ControlsSYSTEM/GROUP Channel Knob Scan ADD/DELETE IndicatorsRamp Control Scan ON/OFFOrion System Model Keypad KeypadStandard Keycap Configuration Optional Keycap ConfigurationKey Descriptions Entry see Selection Mode Rules ALM Primary Functions Quick AccessRadio Status Icons DisplayMessage Name Description MessagesTX Data WHC=1 FIX List Spkr on Alert Tones Autokey Trunked Mode onlyCall Queued Trunked Mode only System Busy Trunked Mode onlyOperation Call Denied Trunked Mode onlyCarrier Control Timer Dual Control SwitchingTurning on the Radio Selection Mode RulesU T H Direct AccessMenu N U K L G H T Press SEL Menu Item Information Feature Display Parameter Comment Settings SYS Scan Feature Encryption Display Feature Encryption Data StreamSerial Number ROM 12 Hex Digits Example Number Fields Features EnabledBIT Fields Possible Features System Selection SYSTEM/GROUP/CHANNEL SelectionGroup And Channel Selection Trunked Mode Operation Receiving a CallSending a Call Conventional Failsoft Emergency OperationReceiving An Emergency Call System Scan Operation Declaring An Emergency CallWide Area System Scan ProScanTM ProSoundTMMenu Selection When Wide Area System Scan Is EnabledWhen ProSound/ProScan Is Enabled Priority System ScanGroup Scan Operation Deleting Groups From a Scan List Adding Groups To a Scan ListNuisance Delete Turning Scan onPriority Group Scanning Individual Calls Turning Scan OFFReceiving and Responding To An Individual Call Page Sending An Individual Call Scat OperationReceiving a Telephone Interconnect Call Trunked Mode Only Sending a Telephone Interconnect Call Trunked Mode OnlyTelephone Interconnect Calls Dtmf Overdial/Conventional Mode Telephone Interconnect Programmable Entries Displays Mobile DataData On Operation Data OFF OperationExiting Data Calls Scan Lockout ModeSTATUS/MESSAGE Operation Data Lockout ModeStatus Operation Message Operation Edacs Conventional P1 ScanConventional Mode Operation Dynamic Regroup OperationEmergency Operation Receiving a Call Tone Encode Transmission Using 5-Tone Signalling for Emergency DeclarationScanning Conventional Channels Deleting Channels From a Scan List Adding Channels To a Scan ListTurning Scan OFF Turning Scan onSquelch Adjust Type 99 Decode Conventional Only Noise Blanker OperationMenu Selection Direct Mode Operation Conventional System Only Trunked or Conventional Mode Operation SIREN/LIGHT OperationVoice Modes AEGIS/ProVoice Digital Mode YesClear Modes ERR=xxxx Error MessagesPage Displaying The Currently Used Cryptographic Key Number Transferring Keys Into The RadioKey Zero Private Operation Receiving An Encrypted CallTransmitting An Encrypted Call Conventional Operation Outside Address Scanned Group CallsChannel Guard Switching ControlControl Switching Modes Dual Control OperationSlaved Mode Operation Independent Mode OperationSiren And Light Control Shared Control Unit Display Modes Multiple Radio OperationDual Control Audio Changing Selected RadioAudio First Come First Serve First Come First Serve DisplayAudio Modes Audio SummedMacro KEY Operation Page Keypad Remapping Operating Rules and Regulations Glossary System Group Or Subfleet Group Scan Individual Call QueueingSite ControllerConnect Talk-aroundTelephone InterRadio Type Frequency Band Operators Name Emergency Group Operators Radio SetupWarranty Operating Tips Emergency Numbers