Orion LBI-38888K manual Nuisance Delete, Turning Scan on, Priority Group Scanning

Page 41

Nuisance Delete

A group can also be deleted from the scan list, if it is not the currently

selected group, by pressing >during scan operation while the radio is displaying the unwanted group. The group will be deleted from the system's group scan list in the same manner as if done using the steps above. Deletions done in this manner will not remain deleted if the radio is turned OFF and then back ON.

Turning Scan ON

1.Toggle scan operation by pressing k. The SCAN indicator will turn on when the radio is scanning.

NOTE

The kkey light will blink when temporarily disabled.

Scanning will stop while microphone is OFF-hook if hookswitch feature is enabled through programming.

2.When a group on the scan list receives a channel assignment, the radio unmutes on the assigned channel, BSY indicator comes on and the received scan group is displayed.

•The radio will continue scanning if a new group is selected when scan is on.

•Pressing the PTT button when scan is on will cause the radio to transmit on the displayed group or to the currently selected group depending on programming.

•Pressing < when scan is on will cause the radio to recall the scanned group that was last received. This group is recalled for a period equal to the scan hang time.

Priority Group Scanning

When scan is enabled and the Priority 1 and Priority 2 groups have been identified, the radio will listen to calls on those groups and the selected group. While receiving a scanned group call, the radio will continue to monitor the selected, Priority 1 and Priority 2 groups and will drop the call if the selected group or other higher priority call becomes active. During a Priority 2 call the radio will continue to monitor for a Priority 1 group call.

41

Image 41

Contents Orion Product Specification for CE Marked Equipment Table of Contents Table of Contents List of the possible hazards are Explosive Atmospheres Safety InformationInterference To Vehicular Electronic Systems Dynamite Blasting CapsUser Interface IntroductionOrion Mobile Radio System Model Front Panel SYSTEM/GROUP Channel Knob Power ON-OFF Volume KnobControls Ramp Control IndicatorsScan ON/OFF Scan ADD/DELETEOrion System Model Keypad KeypadKey Descriptions Standard Keycap ConfigurationOptional Keycap Configuration Entry see Selection Mode Rules ALM Primary Functions Quick AccessRadio Status Icons DisplayMessage Name Description MessagesTX Data WHC=1 FIX List Spkr on Call Queued Trunked Mode only Autokey Trunked Mode onlySystem Busy Trunked Mode only Alert TonesCarrier Control Timer Call Denied Trunked Mode onlyDual Control Switching OperationTurning on the Radio Selection Mode RulesU T H Direct AccessMenu N U K L G H T Press SEL Menu Item Information Feature Display Parameter Comment Settings SYS Scan Serial Number ROM 12 Hex Digits Example Feature Encryption DisplayFeature Encryption Data Stream Number Fields Features EnabledBIT Fields Possible Features System Selection SYSTEM/GROUP/CHANNEL SelectionGroup And Channel Selection Sending a Call Trunked Mode OperationReceiving a Call Receiving An Emergency Call Conventional FailsoftEmergency Operation Wide Area System Scan System Scan OperationDeclaring An Emergency Call ProScanTM ProSoundTMWhen ProSound/ProScan Is Enabled When Wide Area System Scan Is EnabledPriority System Scan Menu SelectionGroup Scan Operation Deleting Groups From a Scan List Adding Groups To a Scan ListPriority Group Scanning Nuisance DeleteTurning Scan on Receiving and Responding To An Individual Call Individual CallsTurning Scan OFF Page Sending An Individual Call Scat OperationTelephone Interconnect Calls Receiving a Telephone Interconnect Call Trunked Mode OnlySending a Telephone Interconnect Call Trunked Mode Only Dtmf Overdial/Conventional Mode Telephone Interconnect Programmable Entries Displays Mobile DataData On Operation Data OFF OperationExiting Data Calls Scan Lockout ModeSTATUS/MESSAGE Operation Data Lockout ModeStatus Operation Message Operation Edacs Conventional P1 ScanEmergency Operation Conventional Mode OperationDynamic Regroup Operation Receiving a Call Tone Encode Transmission Using 5-Tone Signalling for Emergency DeclarationScanning Conventional Channels Deleting Channels From a Scan List Adding Channels To a Scan ListTurning Scan OFF Turning Scan onSquelch Adjust Type 99 Decode Conventional Only Noise Blanker OperationMenu Selection Direct Mode Operation Conventional System Only Voice Modes Trunked or Conventional Mode OperationSIREN/LIGHT Operation Clear Modes AEGIS/ProVoice Digital ModeYes ERR=xxxx Error MessagesPage Displaying The Currently Used Cryptographic Key Number Transferring Keys Into The RadioTransmitting An Encrypted Call Key ZeroPrivate Operation Receiving An Encrypted Call Conventional Operation Outside Address Scanned Group CallsControl Switching Modes Switching ControlDual Control Operation Channel GuardSiren And Light Control Slaved Mode OperationIndependent Mode Operation Dual Control Audio Multiple Radio OperationChanging Selected Radio Shared Control Unit Display ModesAudio Modes First Come First Serve DisplayAudio Summed Audio First Come First ServeMacro KEY Operation Page Keypad Remapping Operating Rules and Regulations Glossary Site Group Or Subfleet Group Scan Individual Call QueueingController SystemTelephone Talk-aroundInter ConnectRadio Type Frequency Band Operators Name Emergency Group Operators Radio SetupWarranty Operating Tips Emergency Numbers