SENDING A MANUALLY ENTERED INTERCONNECT CALL (SYSTEM MODEL ONLY)
1.Select a channel in the radio system that has telephone interconnect capability. The radio should be programmed for DTMF operation on this channel.
2.Press the k button to toggle the keypad to the DTMF function (secondary function).
3.Press and hold PTT to key the transmitter. While holding the PTT, press the * or # key (as required by the radio system to obtain a telephone line). The radio will transmit the selected tone.
4.Release the PTT and listen for a dial tone. When the dial tone is heard, press and hold the PTT while entering the desired telephone number. If
5.After all the digits have been entered and transmitted, release the PTT.
6.When someone answers, press the PTT and speak directly into the microphone. Release the PTT as soon as you stop talking to receive a reply.
7.At the completion of the call, press and hold PTT and then press the * or
# key (as required by radio system) to terminate the interconnect call. Release the PTT.
8.Press kto toggle the keypad back to the primary function if no more interconnect calls are to be made.
76