Orion LBI-38888K manual Noise Blanker Operation, Type 99 Decode Conventional Only

Page 61

2.Use the RAMP control ,or .to scroll through the values. Then

press the m (SELECT) key to save the new value or wait for the display time-out (2 seconds). The displayed value will be selected and saved.

3.If the ckey is pressed before the time-out, the squelch level will not be updated and the original value will be restored.

NOISE BLANKER OPERATION

A noise blanker feature is available in the low band (29-50 MHz) version of the Orion radio which provides ignition noise filtering. The feature can be enabled through either the pre-programmed menu selection or a pre- programmed key on the control unit. The noise blanker state is remembered through a power cycle and its state will be displayed at power-up (i.e., NB ON or NB OFF). The menu selection or the pre-programmed key will toggle the state of the noise blanker and display the new state.

Menu Selection

Press mand then use the RAMP control ,or .to scroll through the

selections until NB ON or NB OFF is displayed. Then press m to toggle the noise blanker state (NB ON or NB OFF). After the display time-

out (2 seconds) then press m again to save the new noise blanker state and return to normal operations.

Pre-Programmed Keypad Key

Press the pre-programmed key and the display will indicate NB ON or NB OFF. Press the key again to toggle the function.

TYPE 99 DECODE (Conventional Only)

If the Type 99 Decode Option has been pre-programmed, individual selective calling is possible. The radio can now decode individual, group or supergroup paging calls. Two sets of Type 99 paging codes must be pre- programmed into the radio. When the radio decodes an appropriate Type 99 code sequence, an alert tone and visual indicator is provided to the user. The receiver then operates as a noise squelched unit until Type 99 is reset. Type 99 decode continues to operate during this noise squelched period. The appropriate Type 99 alert tone will sound again if it detects a valid two-tone sequence.

61

Image 61

Contents Orion Product Specification for CE Marked Equipment Table of Contents Table of Contents List of the possible hazards are Explosive Atmospheres Safety InformationInterference To Vehicular Electronic Systems Dynamite Blasting CapsUser Interface IntroductionOrion Mobile Radio System Model Front Panel Controls Power ON-OFF Volume KnobSYSTEM/GROUP Channel Knob Ramp Control IndicatorsScan ON/OFF Scan ADD/DELETEOrion System Model Keypad KeypadOptional Keycap Configuration Standard Keycap ConfigurationKey Descriptions Entry see Selection Mode Rules ALM Primary Functions Quick AccessRadio Status Icons DisplayMessage Name Description MessagesTX Data WHC=1 FIX List Spkr on Call Queued Trunked Mode only Autokey Trunked Mode onlySystem Busy Trunked Mode only Alert TonesCarrier Control Timer Call Denied Trunked Mode onlyDual Control Switching OperationTurning on the Radio Selection Mode RulesU T H Direct AccessMenu N U K L G H T Press SEL Menu Item Information Feature Display Parameter Comment Settings SYS Scan Feature Encryption Data Stream Feature Encryption DisplaySerial Number ROM 12 Hex Digits Example Number Fields Features EnabledBIT Fields Possible Features System Selection SYSTEM/GROUP/CHANNEL SelectionGroup And Channel Selection Receiving a Call Trunked Mode OperationSending a Call Emergency Operation Conventional FailsoftReceiving An Emergency Call Declaring An Emergency Call System Scan OperationWide Area System Scan ProScanTM ProSoundTMWhen ProSound/ProScan Is Enabled When Wide Area System Scan Is EnabledPriority System Scan Menu SelectionGroup Scan Operation Deleting Groups From a Scan List Adding Groups To a Scan ListTurning Scan on Nuisance DeletePriority Group Scanning Turning Scan OFF Individual CallsReceiving and Responding To An Individual Call Page Sending An Individual Call Scat OperationSending a Telephone Interconnect Call Trunked Mode Only Receiving a Telephone Interconnect Call Trunked Mode OnlyTelephone Interconnect Calls Dtmf Overdial/Conventional Mode Telephone Interconnect Programmable Entries Displays Mobile DataData On Operation Data OFF OperationExiting Data Calls Scan Lockout ModeSTATUS/MESSAGE Operation Data Lockout ModeStatus Operation Message Operation Edacs Conventional P1 ScanDynamic Regroup Operation Conventional Mode OperationEmergency Operation Receiving a Call Tone Encode Transmission Using 5-Tone Signalling for Emergency DeclarationScanning Conventional Channels Deleting Channels From a Scan List Adding Channels To a Scan ListTurning Scan OFF Turning Scan onSquelch Adjust Type 99 Decode Conventional Only Noise Blanker OperationMenu Selection Direct Mode Operation Conventional System Only SIREN/LIGHT Operation Trunked or Conventional Mode OperationVoice Modes Yes AEGIS/ProVoice Digital ModeClear Modes ERR=xxxx Error MessagesPage Displaying The Currently Used Cryptographic Key Number Transferring Keys Into The RadioPrivate Operation Receiving An Encrypted Call Key ZeroTransmitting An Encrypted Call Conventional Operation Outside Address Scanned Group CallsControl Switching Modes Switching ControlDual Control Operation Channel GuardIndependent Mode Operation Slaved Mode OperationSiren And Light Control Dual Control Audio Multiple Radio OperationChanging Selected Radio Shared Control Unit Display ModesAudio Modes First Come First Serve DisplayAudio Summed Audio First Come First ServeMacro KEY Operation Page Keypad Remapping Operating Rules and Regulations Glossary Site Group Or Subfleet Group Scan Individual Call QueueingController SystemTelephone Talk-aroundInter ConnectRadio Type Frequency Band Operators Name Emergency Group Operators Radio SetupWarranty Operating Tips Emergency Numbers