SThis key is used to enter the System select mode.
gThis key is used to enter the Group select mode.
oThis key function is used to toggle a PC programmable feature ON and OFF.
O
DEL Secondary function - used to delete a digit during numeric
entry (see SELECTION MODE RULES).
mPrimary function - accesses the menu list. This is a list of additional features that are not available directly from the keypad. See MENU for details.
SELECT Secondary function - activates a selected item within a list. After the menus list is accessed, select a menu item from the list via RAMP control , or . and activate it with this key. Once activated, MENU continues its secondary function for activating a selected parameter setting until the radio returns to its normal receive state. This is similar to an enter key.
sThe Status key permits the transmission of a pre- programmed status message to an EDACS site.
nThe Message key permits the transmission of a pre- programmed message to an EDACS site.
cServes several purposes depending on the operating mode. In trunked mode, the CLR button exits the current operation and removes all displays associated with it. The radio and
Cdisplay then return to the group receive state. In Conventional mode, pressing this button unmutes the receiver so activity on the selected channel can be monitored. When pressed and held for approximately 3 seconds, this button toggles conventional channel decoding (Channel Guard, Digital Channel Guard, T99) on and OFF if programmed for the selected channel.
pUsed to place telephone calls through the radio by selecting the interconnect special call function. See Telephone Interconnect Calls for details.
dUsed to adjust the current display intensity and the keypad backlight level.
12