Orion LBI-38888K Operation, Call Denied Trunked Mode only, Carrier Control Timer, KEY Press Alert

Page 21

CALL DENIED (TRUNKED MODE ONLY)

If the radio is keyed and a low pitched tone is heard then the radio is not authorized on the system that has been selected.

CARRIER CONTROL TIMER

If the programmed time for continuous transmission is exceeded, five short high-pitched warning tones followed by a long low-pitched tone will be heard. The transmitter will shut down shortly after hearing the alert, interrupting communications. Release and re-key the PTT button to maintain communications. This will reset the carrier control timer and turn the transmitter back on.

KEY PRESS ALERT

A short tone or "beep" sounds to indicate a key has been pressed. A short low-pitched tone indicates no action was taken because the key is not active in the current mode.

DUAL CONTROL SWITCHING

When control is switched to a previously idle control unit, two short high- pitched tones will sound at the control unit where PTT was pressed, that is now the active controller.

OPERATION

The ORION mobile radio unit can be programmed to operate in either a trunked system or a conventional system or both. Operating features and functions have been grouped according to the type of system the radio is operational. This first section contains general operating procedures (e.g., Turning On The Radio). The second section, TRUNKED MODE OPERATION, covers those operating procedures that are only used in a trunked system (e.g., Group Scan). The third section, CONVENTIONAL MODE OPERATION, covers those operating procedures that are only used in a conventional system (e.g., Squelch Adjust). The fourth section, TRUNKED OR CONVENTIONAL MODE OPERATION, covers those operating procedures that may be used in either a trunked or conventional system (e.g., Multiple Radio Operation).

21

Image 21

Contents Orion Product Specification for CE Marked Equipment Table of Contents Table of Contents List of the possible hazards are Explosive Atmospheres Safety InformationInterference To Vehicular Electronic Systems Dynamite Blasting CapsUser Interface IntroductionOrion Mobile Radio System Model Front Panel Power ON-OFF Volume Knob ControlsSYSTEM/GROUP Channel Knob Ramp Control IndicatorsScan ON/OFF Scan ADD/DELETEOrion System Model Keypad KeypadStandard Keycap Configuration Optional Keycap ConfigurationKey Descriptions Entry see Selection Mode Rules ALM Primary Functions Quick AccessRadio Status Icons DisplayMessage Name Description MessagesTX Data WHC=1 FIX List Spkr on Call Queued Trunked Mode only Autokey Trunked Mode onlySystem Busy Trunked Mode only Alert TonesCarrier Control Timer Call Denied Trunked Mode onlyDual Control Switching OperationTurning on the Radio Selection Mode RulesU T H Direct AccessMenu N U K L G H T Press SEL Menu Item Information Feature Display Parameter Comment Settings SYS Scan Feature Encryption Display Feature Encryption Data StreamSerial Number ROM 12 Hex Digits Example Number Fields Features EnabledBIT Fields Possible Features System Selection SYSTEM/GROUP/CHANNEL SelectionGroup And Channel Selection Trunked Mode Operation Receiving a CallSending a Call Conventional Failsoft Emergency OperationReceiving An Emergency Call System Scan Operation Declaring An Emergency CallWide Area System Scan ProScanTM ProSoundTMWhen ProSound/ProScan Is Enabled When Wide Area System Scan Is EnabledPriority System Scan Menu SelectionGroup Scan Operation Deleting Groups From a Scan List Adding Groups To a Scan ListNuisance Delete Turning Scan onPriority Group Scanning Individual Calls Turning Scan OFFReceiving and Responding To An Individual Call Page Sending An Individual Call Scat OperationReceiving a Telephone Interconnect Call Trunked Mode Only Sending a Telephone Interconnect Call Trunked Mode OnlyTelephone Interconnect Calls Dtmf Overdial/Conventional Mode Telephone Interconnect Programmable Entries Displays Mobile DataData On Operation Data OFF OperationExiting Data Calls Scan Lockout ModeSTATUS/MESSAGE Operation Data Lockout ModeStatus Operation Message Operation Edacs Conventional P1 ScanConventional Mode Operation Dynamic Regroup OperationEmergency Operation Receiving a Call Tone Encode Transmission Using 5-Tone Signalling for Emergency DeclarationScanning Conventional Channels Deleting Channels From a Scan List Adding Channels To a Scan ListTurning Scan OFF Turning Scan onSquelch Adjust Type 99 Decode Conventional Only Noise Blanker OperationMenu Selection Direct Mode Operation Conventional System Only Trunked or Conventional Mode Operation SIREN/LIGHT OperationVoice Modes AEGIS/ProVoice Digital Mode YesClear Modes ERR=xxxx Error MessagesPage Displaying The Currently Used Cryptographic Key Number Transferring Keys Into The RadioKey Zero Private Operation Receiving An Encrypted CallTransmitting An Encrypted Call Conventional Operation Outside Address Scanned Group CallsControl Switching Modes Switching ControlDual Control Operation Channel GuardSlaved Mode Operation Independent Mode OperationSiren And Light Control Dual Control Audio Multiple Radio OperationChanging Selected Radio Shared Control Unit Display ModesAudio Modes First Come First Serve DisplayAudio Summed Audio First Come First ServeMacro KEY Operation Page Keypad Remapping Operating Rules and Regulations Glossary Site Group Or Subfleet Group Scan Individual Call QueueingController SystemTelephone Talk-aroundInter ConnectRadio Type Frequency Band Operators Name Emergency Group Operators Radio SetupWarranty Operating Tips Emergency Numbers