JVC BR-DV6000U ¤ Serial Remote OUT terminal mini jack, ‹ Remote 1 RS-422A terminal

Page 19

¤[SERIAL REMOTE OUT] terminal (mini jack)

•This terminal is for direct through-output of serial commands of the serial remote input terminal. (Only with OPERATE ON)

•If REPLICATION of the SYSTEM (2/2) Menu screen is set to SERIAL, this terminal out- puts REC commands when BR-DV6000 be- gins playback. (REPLICATION mode)Use this function to connect BR-DV6000 to a dubbing device for dubbing its playback video or play- back sound.

‹[REMOTE 1] RS-422A terminal

(D-SUB 9-PIN)

This terminal is for connecting to an RS-422A serial interface-compatible editing remote con- troller (e.g. RM-G820).

With this terminal, BR-DV6000 can be used as a player or recorder of an editing system.

To operate BR-DV6000 with RS-422A, perform the following settings.

•Set REMOTE SEL 9-PIN in the REMOTE (1/ 2) Menu screen to “ON”.

•Set the 4 REMOTE / LOCAL switch on the front panel to “REMOTE”.

Memo

●Use screws, of the inch, not metric, system, for fastening the connectors.

●This part can be replaced by the RS-232C serial interface board SA-K46U (sold sepa- rately).

Consult your JVC authorized service agent for such replacements.

›[REMOTE 2] JVC Bus terminal

(12-PIN)

This terminal is for connecting to the JVC bus interface-compatible editing remote controller (RM-G800, RM-G805).

With this terminal, BR-DV6000 can be used as a player or recorder of an editing system.

To operate BR-DV6000 with this terminal, per- form the following settings.

•Set REMOTE SEL JVC in the REMOTE (1/2) Menu screen to “ON”.

•Set the 4 REMOTE / LOCAL switch on the front panel to “REMOTE”.

ﬁSlot cover for an optional board

This cover can be removed to install any of the following optional boards.

•SA-DV6000 network board

•SA-X61U AUDIO XLR IN board (2ch)

•SA-X62U AUDIO XLR OUT board (2ch)

Memo

●With the SA-X61U AUDIO XLR IN board in- stalled, whether sound signals are input to the XLR IN terminal or the AUDIO IN termi- nal can be selected with AUDIO INPUT SEL in the AUDIO MENU. If the MIC terminal is in use, the MIC terminal precedes.

●With the SA-X62U AUDIO XLR OUT board installed, the audio channel to which signals are output can be selected with the AUDIO OUTPUT switch.

19

Image 19

Contents LLT0033-001C-H DV Video Cassette RecorderS3125A Reorient or relocate the receiving antenna RemarqueSync in terminal Backup recording functionDV format Compatible mechanisms for standard/mini DV cas- sette tapesTable of Contents Handling the unit IntroductionRemarks of usage Place of storage and useMaintenance consultation Regular maintenance Regular maintenance Head cleaningRemarks on the use of tape Cleaning tapeCassette tape MemoHead drum Videotape CondensationOver 10 years It is used at a place of high humidityOperate button/LED Names and Functions of PartsFront panel Cassette loading slot/LED Stop button Play button/LED Pause button/LED FF button/LEDAudio Output switch Memo 4REMOTE/LOCAL switch Input Select switchSwitching is invalid during recording Counter switch Audio Monitor switch The following information is also dis- played Menu button Reset button@PHONES Headphone volume CH2/4Special functions/Setting buttons Video Line OUT terminal BNC Rear panelVideo Line in terminal BNC Video Y/C in terminal 4-PINCH1/3 Audio in terminal RCA Sync in synchronization input Terminal BNCTime Code in terminal BNC Time Code OUT terminal BNCDC power cord clamp Mini jack DC power input terminal 2-PIN Timer recording/playbackSwitch Signal GND terminalSlot cover for an optional board ¤ Serial Remote OUT terminal mini jack‹ Remote 1 RS-422A terminal › Remote 2 JVC Bus terminal 12-PINOn-screen display ON-SCREEN DisplayOn-screen display Description Operation Output CH Status displayMemo Sampling frequency/audio00 00 00 Counter displayDisplay displayed during operation Insert editing in the 32 k audio modeStatus/Event display Display DescriptionAlarm display Dvcam Edit Inhibit DUB InhibitREC TAB Blank DUB InhibitLCD display LCD display mode enlarged displayLCD Non-drop frame Displays the framing mode of the time codeDisplays the operation mode of the VCR It is displayed when condensation occursConnection Connecting video signals Output signal Input signalRecord Synchronization signalYes PlaybackAudio Output switches and output channels Connecting audio signalsHeadphone terminal Digital input Connecting to a monitor TVDigital output Microphone input terminal DV cable Connecting to editing sytem Related VCRs Remote extension cable When an RS-422A-compatible remote controller is used Dubbing with 1 VCR Connection Connection with serial remote terminalsConnect the supplied AC adaptor to BR-DV6000 Connecting the AC adapterDC in terminal Timer switch Alarm messagePreparation Turning on the powerTurning off the power Turning on/off the powerOperation method main unit Selecting the operating method main unit/remote controllerOperation Lock mode Remote controller and operation lock modeEjecting the cassette tape Loading the cassette tapeLoading/Ejecting cassette Selecting the LCD status display Setting the LCD displayAdjusting the LCD display Setting the display time of the LCD displaySetting/Displaying date and time Setting date and timeSetting the date and time in the Clock Adjust Menu screen On-screen status display Selecting date/time display Display 2/2 Menu screen Recording SettingRecording procedure Recording index signalsPress the Play button Audio dubbingPress the Play button to play the tape Press the Pause button while holding down the A.DUB button115MIN Minute tape 175MIN 265MIN RECORDING- Backup recording function For using GY-DV5000 as the source unit Minute tapeOutput from the Serial Remote OUT terminal. Only with Oper Serial remote controller RM-G30, sold separately can be conRecording Recording with serial remote terminals BR-DV6000LCD display External timer recordingAdjust the recording level of sound Set the time, etc., of the external timer Video Menu Setting the switches on the front panelPlayback System Menu screenPlayback of tapes recorded in the PAL format Basic playback procedureFast forward/rewind Search speed Search modeFrame-advance playback Special playback functionsDecreasing the playback speed by 10% Increasing the playback speed by 7%REW button In the Stop mode, press the Blank button Index searchBlank search Search functionIndex repeat playback Repeat Mode in the System 1/2 Menu screenRepeat playback Repeat operationMulti cue-up For details on time code setting and recordingRegistering cue-up points Clearing registered cue-up pointsExiting the Multi Cue-up screen Changing cue-up pointsSearching cue-up points Connect the supplied AC adapter External timer playbackMode, the timer symbol lights up in green Set up the time, etc., of the external timer Dubbing machine BR-DV6000Displaying the time code Time CodePresetting the time code Recording the time code Recording from preset dataPreset time code TCG Source Internal TCG Select PresetTCG Select TCG ModeRecording time code, input to the DV IN/OUT terminal TCG SourceSet TCG Source to Òexternaló Front switchesRecord time codes from an external time code generator TC/UB/CLOCK1/2 Menu screenMonitor / LCD Status display Set the Counter switch to Òtcó or ÒubóPress the Play button to go to the Playback mode Playing back the time codeYes*2 Edit Editing with an RS-422A/JVC bus edit remote controllerEdit mode Analog editing Mode select KHz modeAUD-2 AUD-1 Following editing mode is not availableEdit mode DV editing Mode select AUD-1 To edit with DV connection Editing procedure with BR-DV6000 Remote 1/2 Menu screen Remote 2/2 Menu screenConfirmation by preview editing Setting the Time Code mode used as editing recorder Setting of RM-G820 Making prerecorded base tape used as editing recorderController Type in the Remote 2/2 Menu screen Using a non-linear editing systemRemote FF/REW Mode EditStructure of the Menu screens Menu ScreensTOP Menu screen Setting the menus Set BR-DV6000 to the Stop or Still mode Displaying the Menu screen items for settingSystem 2/2 Menu screen System 1/2 menu TOP Menu screenSystem Menu screens Description of the Menu screens75MIN Backup REC25MIN 55MIN System 2/2 Menu Menu Screens Description of the Menu screens Remote 1/2 Menu screen Remote Menu screens Remote 2/2 Menu screen Zation DelayPB Start SynchroniAudio Menu screen Video Menu screen TC/UB/CLOCK 1/2 Menu screen TC/UB/CLOCK Menu screensDate REC Adjust TC/UB/CLOCK 2/2 Menu screen BIT PAL Display 1/2 Menu screen Display Menu screens Display 2/2 Menu screen RS-232C Interface Command tablesRxD RS-232C specificationsAscii code table 9PIN D-Sub Pin No Preparation RS-232C commandsCommand Description Error commands Return commands from the VCRExample of Clear Error RS-232C Interface RS-232C commands Third byte Setup preset commands First byte Bit No Status If the bit is Second byteExample Set Sync Select to External Menu switch setup commandED Memory SW Preset B/J1 Example Check the Sync Select settingSet value Corresponding bit values D1/D2 System MenusD1/D2 MenuMenu Set value Remote Menus Video Menus Audio Menus TC/UB/CLOCK Menus MAX5 Display Menus12H 24H Others Alarm display Displayed regardless of the Display mode Warning display Displayed regardless of the Display mode Troubleshooting Press the Menu button to return to the normal screen Set BR-DV6000 to the Stop modeChecking the hour meter ¥ The System 1/2 Menu screen is displayed XLR OUT board SA-X62U Installing SA-X61U or SA-X62UOptional devices RS-232C interface board SA-K46U XLR in board SA-X61URemove the RS-422A Remote 1 terminal Installing SA-K46U RS-232C interface boardInstall the SA-K46U Hexagonal screwsSpecifications 212 External dimensions Unit mmAC adapter section SupplementVictor Company of JAPAN, Limited