JVC BR-DV6000U Displays the framing mode of the time code, Non-drop frame, Drop frame

Page 27

4Drop/Non-drop display (for NTSC only)

Displays the framing mode of the time code.

NDF

: Non-drop frame

DF

: Drop frame

PAL

: Displays when PB/DV IN in the SYSTEM (2/2)

 

Menu screen is set to PAL.

5Time code mode display

Displays the time code mode set in the TC/UB/CLOCK Menu screen.

REGN : Regeneration mode

RRUN : REC RUN preset mode

FREE : FREE RUN preset mode

EXT : This is displayed when time codes are input to the TIME CODE IN terminal (with TCG SOURCE set to EXTERNAL).

It blinks when no time code is input or when the phase of an external time code is not locked with the phase of the video signal.

DUPL : This is displayed when TC DUPLICATE is set to AUTO or NON DROP.

(Enter the time code of the DV terminal.)

6Counter mode

The counter mode selected with the COUNTER switch on the front panel is displayed.

CTL : CTL counter

TC : Time code

UB : User’s bit

 

7Counter display

•The CTL counter is displayed as a 7-digit number with + or –. The time code/user’s bit is displayed as an 8-digit number.

8VCR mode display

Displays the operation mode of the VCR.

The reservation of mode is displayed in blinking light. NOCAS (no cassette tape), EJECT, STBON (standby- on), STBOF (standby-off), PLAY, STILL, FF, REW, SHTL, ADUBP (audio dubbing pause), REC, RECP (recording pause), INSERT, ASSEM, OPOFF (operate off)

9VCR mode graphic display

c: Eject L : Stop : : Play J : Still

Z : FF/Forward search

+ : REW/ Reverse search:

a : Record

aJ : Recording pause

: Audio dubbing

J: Audio dubbing pause

0Tape symbol display

:This symbol is displayed when a cassette tape is loaded.

It blinks during loading or ejecting of a cassette tape.

If the rear switch of the cassette tape is set to SAVE, it is displayed in yellow.

!Remaining tape time display

Displays the remaining time (minutes). Blinks if the re- maining time is less than 4 minutes.

Not displayed when the remaining time is being con- firmed. SP will not be displayed when a DVCAM cas- sette tape is being played back.

@Time/Date display

The data of the built-in clock will be displayed during re- cording or in the STOP mode. Displays the data of the tape during playback.

If the date/time is not set up, “– – –” is displayed.

#Input video signal display

Displays the input video signal selected with the INPUT SELECT switch on the front panel.

Blinks if the selected signal is not input (LINE, Y/C, CPNT, or DV).

( LINE , Y/C , CPNT , DV )

In the case of a copy-prohibiting signal, it will be dis- played in yellow.

SYNC : It is displayed when signals are input via the SYNC IN terminal with EXTERNAL SYNC selected.

$Editing mode display

The editing mode selected with the editing remote con- troller is displayed.

(ASSEM, INSV, INSA, INSVA, INS TC, INS VA12, INS VA34, INS A12, INS A34)

%Timer display

r: It is displayed when the TIMER switch on the rear

panel is set to REC or PLAY.

REC: RED

PLAY: GREEN

^Wide screen ID signal display

W: It will be displayed when a wide screen ID signal exists in the input signal of the Y/C or DV terminal. The data on the tape is displayed during playback.

&Condensation display

:It is displayed when condensation occurs.

*Option display

It is displayed when an option board is connected.

XLI : SA-X61U connection

XLO : SA-X62U connection

: SA-DV6000 connection

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents LLT0033-001C-H DV Video Cassette RecorderS3125A Reorient or relocate the receiving antenna RemarqueSync in terminal Backup recording functionDV format Compatible mechanisms for standard/mini DV cas- sette tapesTable of Contents  Handling the unit IntroductionRemarks of usage  Place of storage and useMaintenance consultation Regular maintenance Regular maintenance  Head cleaningRemarks on the use of tape Cleaning tapeCassette tape MemoHead drum Videotape CondensationOver 10 years It is used at a place of high humidityOperate button/LED Names and Functions of PartsFront panel Cassette loading slot/LED Stop button  Play button/LED Pause button/LED  FF button/LED4REMOTE/LOCAL switch Input Select switch Audio Output switch MemoSwitching is invalid during recording Audio Monitor switch Counter switch The following information is also dis- played Menu button Reset button@PHONES Headphone volume CH2/4Special functions/Setting buttons Video Line OUT terminal BNC Rear panelVideo Line in terminal BNC Video Y/C in terminal 4-PINCH1/3 Audio in terminal RCA Sync in synchronization input Terminal BNCTime Code in terminal BNC Time Code OUT terminal BNCDC power cord clamp Mini jack DC power input terminal 2-PIN Timer recording/playbackSwitch Signal GND terminalSlot cover for an optional board ¤ Serial Remote OUT terminal mini jack‹ Remote 1 RS-422A terminal › Remote 2 JVC Bus terminal 12-PINON-SCREEN Display On-screen displayOn-screen display Description Operation Output CH Status displayMemo Sampling frequency/audio00 00 00 Counter displayDisplay displayed during operation Insert editing in the 32 k audio modeStatus/Event display Display DescriptionAlarm display Dvcam Edit Inhibit DUB InhibitREC TAB Blank DUB Inhibit LCD display mode enlarged display LCD displayLCD Non-drop frame Displays the framing mode of the time codeDisplays the operation mode of the VCR It is displayed when condensation occursConnection Connecting video signals Output signal  Input signalRecord  Synchronization signalYes PlaybackConnecting audio signals Audio Output switches and output channelsHeadphone terminal Digital input Connecting to a monitor TVDigital output Microphone input terminal DV cable Connecting to editing sytem Related VCRs  Remote extension cable When an RS-422A-compatible remote controller is used Dubbing with 1 VCR Connection Connection with serial remote terminalsConnect the supplied AC adaptor to BR-DV6000 Connecting the AC adapterDC in terminal Timer switch Alarm messagePreparation Turning on the powerTurning off the power Turning on/off the powerOperation method main unit Selecting the operating method main unit/remote controllerOperation Lock mode Remote controller and operation lock modeLoading the cassette tape Ejecting the cassette tapeLoading/Ejecting cassette  Selecting the LCD status display Setting the LCD displayAdjusting the LCD display Setting the display time of the LCD displaySetting date and time Setting/Displaying date and timeSetting the date and time in the Clock Adjust Menu screen Selecting date/time display On-screen status display Display 2/2 Menu screen Recording SettingRecording procedure Recording index signalsPress the Play button Audio dubbingPress the Play button to play the tape Press the Pause button while holding down the A.DUB button115MIN Minute tape 175MIN 265MIN RECORDING- Backup recording function For using GY-DV5000 as the source unit Minute tapeOutput from the Serial Remote OUT terminal. Only with Oper Serial remote controller RM-G30, sold separately can be conRecording Recording with serial remote terminals BR-DV6000LCD display External timer recordingAdjust the recording level of sound Set the time, etc., of the external timer Video Menu  Setting the switches on the front panelPlayback  System Menu screenBasic playback procedure Playback of tapes recorded in the PAL formatFast forward/rewind Search speed Search modeFrame-advance playback Special playback functionsIncreasing the playback speed by 7% Decreasing the playback speed by 10%REW button  In the Stop mode, press the Blank button Index searchBlank search Search functionIndex repeat playback  Repeat Mode in the System 1/2 Menu screenRepeat playback Repeat operationMulti cue-up For details on time code setting and recordingRegistering cue-up points Clearing registered cue-up pointsChanging cue-up points Exiting the Multi Cue-up screenSearching cue-up points  Connect the supplied AC adapter External timer playbackMode, the timer symbol lights up in green Set up the time, etc., of the external timer Dubbing machine  BR-DV6000Displaying the time code Time CodePresetting the time code Recording the time code Recording from preset dataPreset time code TCG Source Internal TCG Select PresetTCG Select TCG ModeRecording time code, input to the DV IN/OUT terminal TCG SourceSet TCG Source to Òexternaló  Front switchesRecord time codes from an external time code generator  TC/UB/CLOCK1/2 Menu screenMonitor / LCD Status display Set the Counter switch to Òtcó or ÒubóPress the Play button to go to the Playback mode Playing back the time codeYes*2 Edit Editing with an RS-422A/JVC bus edit remote controllerEdit mode Analog editing Mode select KHz modeAUD-2 AUD-1  Following editing mode is not availableEdit mode DV editing Mode select AUD-1 To edit with DV connection Editing procedure with BR-DV6000 Remote 1/2 Menu screen  Remote 2/2 Menu screenConfirmation by preview editing  Setting the Time Code mode used as editing recorder Setting of RM-G820 Making prerecorded base tape used as editing recorderController Type in the Remote 2/2 Menu screen Using a non-linear editing systemRemote FF/REW Mode EditStructure of the Menu screens Menu ScreensTOP Menu screen Setting the menus Set BR-DV6000 to the Stop or Still mode Displaying the Menu screen items for settingSystem 2/2 Menu screen  System 1/2 menu TOP Menu screenSystem Menu screens Description of the Menu screens75MIN Backup REC25MIN 55MIN System 2/2 Menu Menu Screens Description of the Menu screens Remote 1/2 Menu screen Remote Menu screens Remote 2/2 Menu screen Zation DelayPB Start SynchroniAudio Menu screen Video Menu screen  TC/UB/CLOCK 1/2 Menu screen TC/UB/CLOCK Menu screensDate REC Adjust TC/UB/CLOCK 2/2 Menu screen BIT PAL Display 1/2 Menu screen Display Menu screens Display 2/2 Menu screen RS-232C Interface Command tablesRxD RS-232C specificationsAscii code table  9PIN D-Sub Pin No Preparation RS-232C commandsCommand Description Error commands Return commands from the VCRExample of Clear Error RS-232C Interface RS-232C commands  Third byte  Setup preset commands First byte Bit No Status If the bit is  Second byteExample Set Sync Select to External  Menu switch setup commandED Memory SW Preset B/J1 Example Check the Sync Select settingSet value Corresponding bit values D1/D2  System MenusD1/D2 MenuMenu Set value Remote Menus Audio Menus  Video Menus TC/UB/CLOCK Menus  Display Menus MAX512H 24H Others  Alarm display Displayed regardless of the Display mode Warning display Displayed regardless of the Display mode Troubleshooting Press the Menu button to return to the normal screen  Set BR-DV6000 to the Stop modeChecking the hour meter ¥ The System 1/2 Menu screen is displayed XLR OUT board SA-X62U Installing SA-X61U or SA-X62UOptional devices  RS-232C interface board SA-K46U  XLR in board SA-X61URemove the RS-422A Remote 1 terminal Installing SA-K46U RS-232C interface boardInstall the SA-K46U Hexagonal screwsSpecifications 212  External dimensions Unit mmAC adapter section SupplementVictor Company of JAPAN, Limited
Top Page Image Contents