PLAYBACK | – Search function – |
Index search
This function searches to the position where the index signal is recorded.
Mini | MENU | DISP | RESET |
|
|
|
| PROFESSIONAL |
| SEARCH– | SET | SEARCH+ |
|
MIC | HOLD | BLANK | CUE UP |
|
| PHONES | REC LEVEL |
| |
|
|
SEARCHÐ SEARCH+
button button
Monitor screen
INDEX+1
:Setting:
Set Ò;, :Ó KEY FUNC in the SYSTEM (1/2) Menu screen to IN-
DEX.
:Operation:
To search an index point in the forward direction from the current tape position:
¥Press the SEARCH + button.
The index position to be searched can be specified by the number of times this button is pressed. (Max: 99)
To search an index point in the reverse direction from the current tape position:
¥Press the SEARCH Ð button.
The index position to be searched can be specified by the number of times this button is pressed. (Max: 99)
When the SEARCH + or SEARCH – button is pressed, the unit
Index search progressing: displayed on the screen
(The number denotes the corresponding index position.)
Memo
●If the interval between index signals is less than one minute, the function may not work well.
●The specifications for index signal recording varies with the device used.
Blank search
This function searches unrecorded parts of the tape.
Mini | MENU | DISP | RESET |
|
|
| PROFESSIONAL |
| SEARCH– | SET | SEARCH+ |
MIC | HOLD | BLANK | CUE UP |
|
PHONES | REC LEVEL |
| |
|
BLANK button
Monitor screen
In the STOP mode, press the BLANK button.
¥¥ If the current position is at a recorded part of the tape, BR- DV6000
¥If the current position is an unrecorded part of the tape, BR- DV6000 will first advance the tape in the forward direction for confirmation and thereafter rewind and go into the STILL mode at the last recorded position.
¥During a blank search, ÒBLANK SEARCHÓ is displayed on the monitor.
BLANK SEARCH
52