JVC BR-DV6000U DV format, Compatible mechanisms for standard/mini DV cas- sette tapes

Page 4

Thank you for purchasing our

DV Video Cassette Recorder

BR-DV6000.

As this is a DV-format video cassette recorder,

video cassettes with the or logo can be used with it.

DVCAM cassettes can be recorded in the DV format.

●In order to prevent crumpling due to tape slack, do not perform important recording within the first and last 2 – 3 minute-run of the tape.

●Recorded video (sound) is meant for per- sonal entertainment only and must not be used for other purposes without the prior consent of the copyright owner.

●JVC shall not guarantee the quality of re- cording and playback should BR-DV6000 fail to function normally due to defects, either of the unit itself or the video cassette tapes.

MAIN FEATURES

●DV format

High picture and sound quality by digital technology.

●Compatible mechanisms for standard/mini DV cas- sette tapes

It records on and plays back DV cassette tapes of the standard and mini size. (SP mode only)

Recording in the DV format can be performed on DVCAM cassette tapes.

●Only PAL/NTSC DVCAM tapes are detected auto- matically in playback mode.

●Equipped with composite, component and Y/C in- put & output terminals.

●Equipped with DV IN/OUT terminals. (IEEE1394)

It can exchange digital signals with IEEE1394-compat- ible devices.

●Both NTSC and PAL signals supported BR-DV6000 can playback or record PAL tapes through the DV input. For PAL, please set the PB/DV IN menu item to PAL.

For analog signal input, only NTSC is supported.

●RS-422A and JVC bus interface supported RS-422A-compatible edit controller RM-G820 and JVC bus-compatible edit controller RM-G800/G805 can be used for editing.

●Optionally, the RS-232C interface can be used.

●Recording and playback of time codes

●Time code I/O terminal

Slave lock is allowed if BR-DV6000 is connected to an external time code generator.

●SYNC IN terminal

External synchronization signals can be input.

●Audio-dubbing function (after-recording)

If the sampling frequency is 32 kHz, audio dubbing can be performed into CH3 and CH4 (except during DV in- put).

●Backup recording function

With the combined use of other DV machines, long-time continuous recording is possible.

●Using the SERIAL REMOTE OUT terminal or DV ter- minal, dubbing with other recorders is possible only with playback operation by BR-DV6000. (Replication function)

●Equipped with a 2.5-inch color LCD

Images, status display and menu display can be viewed.

●Multi-cue up

Up to 5 points of the tape position can be registered and cued up.

●Index/blank search function

It can search for positions where index signals are re- corded and unrecorded parts.

●Repeat play function

There are 3 types of repeat function.

(INDEX/ VIDEO END/ TAPE END)

●Recording/playback with an external timer

●With the use of the network board SA-DV6000 (sold separately), image and audio streaming data can be recorded on a CF card, and with a LAN card, stream- ing data can be transmitted to a PC.

●With the XLR IN board SA-X61U or XLR OUT board SA-X62U (sold separately), audio input/output via the XLR terminal is possible.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents DV Video Cassette Recorder LLT0033-001C-HS3125A Remarque Reorient or relocate the receiving antennaBackup recording function DV formatCompatible mechanisms for standard/mini DV cas- sette tapes Sync in terminalTable of Contents Introduction Remarks of usage Place of storage and use  Handling the unitRegular maintenance  Regular maintenance Head cleaning Maintenance consultationCleaning tape Cassette tapeMemo Remarks on the use of tapeCondensation Over 10 yearsIt is used at a place of high humidity Head drum VideotapeNames and Functions of Parts Front panelCassette loading slot/LED Operate button/LED Play button/LED  Pause button/LED FF button/LED  Stop buttonAudio Output switch Memo 4REMOTE/LOCAL switch Input Select switchSwitching is invalid during recording Counter switch Audio Monitor switch The following information is also dis- played Reset button @PHONES Headphone volumeCH2/4 Menu buttonSpecial functions/Setting buttons Rear panel Video Line in terminal BNCVideo Y/C in terminal 4-PIN Video Line OUT terminal BNCSync in synchronization input Terminal BNC Time Code in terminal BNCTime Code OUT terminal BNC CH1/3 Audio in terminal RCADC power input terminal 2-PIN Timer recording/playback SwitchSignal GND terminal DC power cord clamp Mini jack¤ Serial Remote OUT terminal mini jack ‹ Remote 1 RS-422A terminal› Remote 2 JVC Bus terminal 12-PIN Slot cover for an optional boardOn-screen display ON-SCREEN DisplayOn-screen display Description Operation Status display MemoSampling frequency/audio Output CHCounter display 00 00 00Insert editing in the 32 k audio mode Status/Event displayDisplay Description Display displayed during operationAlarm display DUB Inhibit REC TABBlank DUB Inhibit Dvcam Edit InhibitLCD display  LCD display mode enlarged displayLCD Displays the framing mode of the time code Displays the operation mode of the VCRIt is displayed when condensation occurs Non-drop frameConnecting video signals  Output signal Input signal Connection Synchronization signal YesPlayback RecordAudio Output switches and output channels Connecting audio signalsHeadphone terminal Connecting to a monitor TV Digital outputMicrophone input terminal Digital inputConnecting to editing sytem  Related VCRs Remote extension cable  DV cable When an RS-422A-compatible remote controller is used Connection Connection with serial remote terminals Dubbing with 1 VCRConnecting the AC adapter DC in terminal Timer switchAlarm message Connect the supplied AC adaptor to BR-DV6000Turning on the power Turning off the powerTurning on/off the power PreparationSelecting the operating method main unit/remote controller Operation Lock modeRemote controller and operation lock mode Operation method main unitEjecting the cassette tape Loading the cassette tapeLoading/Ejecting cassette Setting the LCD display Adjusting the LCD displaySetting the display time of the LCD display  Selecting the LCD status displaySetting/Displaying date and time Setting date and timeSetting the date and time in the Clock Adjust Menu screen On-screen status display Selecting date/time display Display 2/2 Menu screen Setting RecordingRecording index signals Recording procedureAudio dubbing Press the Play button to play the tapePress the Pause button while holding down the A.DUB button Press the Play buttonRECORDING- Backup recording function  For using GY-DV5000 as the source unitMinute tape 115MIN Minute tape 175MIN 265MINSerial remote controller RM-G30, sold separately can be con Recording Recording with serial remote terminalsBR-DV6000 Output from the Serial Remote OUT terminal. Only with OperExternal timer recording Adjust the recording level of soundSet the time, etc., of the external timer LCD display Setting the switches on the front panel Playback System Menu screen  Video MenuPlayback of tapes recorded in the PAL format Basic playback procedureFast forward/rewind Search mode Frame-advance playbackSpecial playback functions Search speedDecreasing the playback speed by 10% Increasing the playback speed by 7%REW button Index search Blank searchSearch function  In the Stop mode, press the Blank button Repeat Mode in the System 1/2 Menu screen Repeat playbackRepeat operation Index repeat playbackFor details on time code setting and recording Registering cue-up pointsClearing registered cue-up points Multi cue-upExiting the Multi Cue-up screen Changing cue-up pointsSearching cue-up points External timer playback Mode, the timer symbol lights up in greenSet up the time, etc., of the external timer  Connect the supplied AC adapter BR-DV6000  Dubbing machineTime Code Displaying the time codePresetting the time code Recording from preset data Preset time codeTCG Source Internal TCG Select Preset Recording the time codeTCG Mode Recording time code, input to the DV IN/OUT terminalTCG Source TCG Select Front switches Record time codes from an external time code generator TC/UB/CLOCK1/2 Menu screen Set TCG Source to ÒexternalóSet the Counter switch to Òtcó or Òubó Press the Play button to go to the Playback modePlaying back the time code Monitor / LCD Status displayEdit Editing with an RS-422A/JVC bus edit remote controller Edit mode Analog editing Mode selectKHz mode Yes*2 Following editing mode is not available Edit mode DV editing Mode selectAUD-1 AUD-2 AUD-1Editing procedure with BR-DV6000  Remote 1/2 Menu screen Remote 2/2 Menu screen  To edit with DV connection Setting the Time Code mode used as editing recorder  Setting of RM-G820Making prerecorded base tape used as editing recorder Confirmation by preview editingUsing a non-linear editing system Remote FF/REW ModeEdit Controller Type in the Remote 2/2 Menu screenMenu Screens Structure of the Menu screensSetting the menus  Set BR-DV6000 to the Stop or Still modeDisplaying the Menu screen items for setting TOP Menu screenSystem 2/2 Menu screen TOP Menu screen System Menu screensDescription of the Menu screens  System 1/2 menuBackup REC 25MIN55MIN 75MINMenu Screens Description of the Menu screens  System 2/2 MenuRemote Menu screens  Remote 1/2 Menu screen Remote 2/2 Menu screen Delay PB StartSynchroni ZationAudio Menu screen Video Menu screen TC/UB/CLOCK Menu screens  TC/UB/CLOCK 1/2 Menu screenAdjust  TC/UB/CLOCK 2/2 Menu screenBIT PAL Date RECDisplay Menu screens  Display 1/2 Menu screen Display 2/2 Menu screen Command tables RS-232C InterfaceRS-232C specifications Ascii code table 9PIN D-Sub Pin No RxDRS-232C commands  PreparationCommand Description Return commands from the VCR Error commandsExample of Clear Error RS-232C Interface RS-232C commands  Setup preset commands  First byte Bit No Status If the bit is Second byte  Third byte Menu switch setup command ED Memory SW Preset B/J1Example Check the Sync Select setting Example Set Sync Select to External System Menus D1/D2Menu Set value Corresponding bit values D1/D2Remote Menus Menu Set value Video Menus  Audio Menus TC/UB/CLOCK Menus MAX5  Display Menus12H 24H  Alarm display Displayed regardless of the Display mode Others Warning display Displayed regardless of the Display mode Troubleshooting  Set BR-DV6000 to the Stop mode Checking the hour meter¥ The System 1/2 Menu screen is displayed Press the Menu button to return to the normal screenInstalling SA-X61U or SA-X62U Optional devices RS-232C interface board SA-K46U  XLR in board SA-X61U  XLR OUT board SA-X62UInstalling SA-K46U RS-232C interface board Install the SA-K46UHexagonal screws Remove the RS-422A Remote 1 terminalSpecifications  External dimensions Unit mm 212Supplement AC adapter sectionVictor Company of JAPAN, Limited
Top Page Image Contents