JVC BR-DV6000U Status/Event display, Display Description, Insert editing in the 32 k audio mode

ON-SCREEN DISPLAY			– Status/Event display –
No.	Item		Description
4	VCR operation mode	Displays the VCR operation mode, including:
		PLAY, EJECT, FF, REW, STANDBY-ON, STANDBY-OFF, STILL,
		REC, REC PAUSE, A. DUB, A. DUB PAUSE, ASSEM EDIT, INSERT
		EDIT, SHTL (shuttle search), JOG, BLANK SRH (blank search),
		NO CASSETTE (cassette tape not loaded), OPERATE OFF.
		For SHTL and JOG, the speed is also displayed.
		• The display can be turned on/off with VTR MODE in the DISPLAY
		Menu screen.
5	Remaining tape	Displays the remaining time of tape (minutes).
	Memo	Not displayed when the remaining time is being confirmed.
	If the counter display po-	• The display can be turned on/off with TAPE REMAIN in the DIS-
		PLAY Menu screen.
	sition is set to the upper
		• The SP display disappears when a DVCAM cassette tape is be-
	right, this item will be dis-
		ing played back.
	played on the lower right.
		• This remaining tape time display is only for reference.
6	Edit mode display	Displays the edit mode selected, e.g., by using the edit mode controller.
	Memo	• ASSEM	:Assemble editing
		• INS V :Video insert editing
	● With the counter dis-
		• INS A :Audio insert editing (Audio: both CH 1 and CH 2)
	play shown on the top	• INS VA	:Video, audio insert editing (Audio: both CH 1 and
	left, this display ap-		CH 2)
	pears on the bottom	• INS VA	:Video/Audio insert editing
	right.	• INS TC	:Time code insert editing (Time code only)
	● In the 48 k audio mode,	Insert editing in the 32 k audio mode
	insert editing is not	• INS A12	:CH1, CH2 audio
	possible in the follow-	• INS A34	:CH3, CH4 audio
	ing cases.	• INS VA12:Video & CH1, CH2 audio
	INS A1, INS A2, INS	• INS VA34:Video & CH3, CH4 audio
	VA1, INS VA2	• INS A :CH1 to CH4 audio
		• INS VA	:Video & CH1 to CH4 audio
		The display can be turned on/off with EDIT INFO in the DISPLAY
		Menu screen.

Event display : When certain functions are in use, it is displayed at the following posi- tions (with the DISPLAY mode ON or AUTO).

A

B

3 2 K C H – 1 / 2S P 0 0 0 m i n

B L A N K S E A R C H

I N D E X D E T E C T E D

0 3 / 0 4 / 0 3	S T A N D B Y - O F F
1 1 : 2 0 : 0 0	T C R 0 2 : 0 0 : 0 0 : 0 0

●“A” display: displayed during operation

Display	Description
BLANK	Blank search in progress.
SEARCH
INDEX +1	Index search in progress.
	The number indicates the index
	search position.
INDEX MARK	When an index has been speci-
	fied on the tape during record-
	ing.

●“B” display: displayed for about 3 seconds

Display	Description
INDEX	An index has been detected
DETECTED	during index repeat operation.
VIDEO END	The video end has been de-
DETECTED	tected during end repeat op-
	eration.

23