JVC BR-DV6000U instruction manual Remote Menu screens, Remote 1/2 Menu screen

Page 75

REMOTE Menu screens

The REMOTE Menu consists of the following two screens (1/2 and 2/2).

REMOTE (1/2) Menu screen

Item	Setting		Description
REMOTE SEL	OFF	For enabling/disabling the REMOTE1 (9-PIN) terminal when the
9P	ON	REMOTE/LOCAL switch on the front panel is set to REMOTE.
		OFF	: Control through RS-422A disabled
		ON	: Control through RS-422A enabled

Memo

When the RS-232C board SA-K46U (sold separately) is installed, the name of this item changes to REMOTE SEL 232.

Use this setting to enable/disable the control via RS-232C when the REMOTE/LOCAL switch on the front panel is set to REMOTE.

REMOTE SEL	OFF	For enabling/disabling control via the SERIAL REMOTE IN ter-
SER	ON	minal.
	LOC+REM	OFF	: Control disabled regardless of the settings of the
		ON	REMOTE/LOCAL switch
		ON	: Control enabled only when the REMOTE/
		LOC+REM	LOCALswitch is set to REMOTE.
		LOC+REM	: Control enabled regardless of the settings of the
			REMOTE/LOCAL switch.

REMOTE SEL	OFF	For enabling/disabling control via the DV terminal.
DV	ON	OFF	: Control disabled regardless of the settings of the
	LOC+REM	ON	REMOTE/LOCAL switch.
		ON	: Control enabled only when the REMOTE/
		LOC+REM	LOCALswitch is set to REMOTE.
		LOC+REM	: Control enabled regardless of the settings of the
			REMOTE/LOCAL switch.

REMOTE SEL	OFF	For enabling/disabling the REMOTE 2 (12-PIN) terminal when
JVC	ON	the REMOTE/LOCAL switch on the front panel is set to REMOTE.
		OFF	: Control through the JVC bus disabled
		ON	: Control through the JVC bus enabled

REMOTE SEL	OFF	For enabling/disabling control via the network board SA-DV6000
NET	ON	(sold separately).
	LOC+REM	OFF	: Control disabled regardless of the settings of the
		ON	REMOTE/LOCAL switch.
		ON	: Control enabled only when the REMOTE/
		LOC+REM	LOCALswitch is set to REMOTE.
		LOC+REM	: Control enabled regardless of the settings of the
			REMOTE/LOCAL switch.

75

Image 75

Contents LLT0033-001C-H DV Video Cassette RecorderS3125A Reorient or relocate the receiving antenna RemarqueSync in terminal Backup recording functionDV format Compatible mechanisms for standard/mini DV cas- sette tapesTable of Contents Handling the unit IntroductionRemarks of usage Place of storage and useMaintenance consultation Regular maintenance Regular maintenance Head cleaningRemarks on the use of tape Cleaning tapeCassette tape MemoHead drum Videotape CondensationOver 10 years It is used at a place of high humidityOperate button/LED Names and Functions of PartsFront panel Cassette loading slot/LED Stop button Play button/LED Pause button/LED FF button/LED4REMOTE/LOCAL switch Input Select switch Audio Output switch MemoSwitching is invalid during recording Audio Monitor switch Counter switch The following information is also dis- played Menu button Reset button@PHONES Headphone volume CH2/4Special functions/Setting buttons Video Line OUT terminal BNC Rear panelVideo Line in terminal BNC Video Y/C in terminal 4-PINCH1/3 Audio in terminal RCA Sync in synchronization input Terminal BNCTime Code in terminal BNC Time Code OUT terminal BNCDC power cord clamp Mini jack DC power input terminal 2-PIN Timer recording/playbackSwitch Signal GND terminalSlot cover for an optional board ¤ Serial Remote OUT terminal mini jack‹ Remote 1 RS-422A terminal › Remote 2 JVC Bus terminal 12-PINON-SCREEN Display On-screen displayOn-screen display Description Operation Output CH Status displayMemo Sampling frequency/audio00 00 00 Counter displayDisplay displayed during operation Insert editing in the 32 k audio modeStatus/Event display Display DescriptionAlarm display Dvcam Edit Inhibit DUB InhibitREC TAB Blank DUB Inhibit LCD display mode enlarged display LCD displayLCD Non-drop frame Displays the framing mode of the time codeDisplays the operation mode of the VCR It is displayed when condensation occursConnection Connecting video signals Output signal Input signalRecord Synchronization signalYes PlaybackConnecting audio signals Audio Output switches and output channelsHeadphone terminal Digital input Connecting to a monitor TVDigital output Microphone input terminal DV cable Connecting to editing sytem Related VCRs Remote extension cable When an RS-422A-compatible remote controller is used Dubbing with 1 VCR Connection Connection with serial remote terminalsConnect the supplied AC adaptor to BR-DV6000 Connecting the AC adapterDC in terminal Timer switch Alarm messagePreparation Turning on the powerTurning off the power Turning on/off the powerOperation method main unit Selecting the operating method main unit/remote controllerOperation Lock mode Remote controller and operation lock modeLoading the cassette tape Ejecting the cassette tapeLoading/Ejecting cassette Selecting the LCD status display Setting the LCD displayAdjusting the LCD display Setting the display time of the LCD displaySetting date and time Setting/Displaying date and timeSetting the date and time in the Clock Adjust Menu screen Selecting date/time display On-screen status display Display 2/2 Menu screen Recording SettingRecording procedure Recording index signalsPress the Play button Audio dubbingPress the Play button to play the tape Press the Pause button while holding down the A.DUB button115MIN Minute tape 175MIN 265MIN RECORDING- Backup recording function For using GY-DV5000 as the source unit Minute tapeOutput from the Serial Remote OUT terminal. Only with Oper Serial remote controller RM-G30, sold separately can be conRecording Recording with serial remote terminals BR-DV6000LCD display External timer recordingAdjust the recording level of sound Set the time, etc., of the external timer Video Menu Setting the switches on the front panelPlayback System Menu screenBasic playback procedure Playback of tapes recorded in the PAL formatFast forward/rewind Search speed Search modeFrame-advance playback Special playback functionsIncreasing the playback speed by 7% Decreasing the playback speed by 10%REW button In the Stop mode, press the Blank button Index searchBlank search Search functionIndex repeat playback Repeat Mode in the System 1/2 Menu screenRepeat playback Repeat operationMulti cue-up For details on time code setting and recordingRegistering cue-up points Clearing registered cue-up pointsChanging cue-up points Exiting the Multi Cue-up screenSearching cue-up points Connect the supplied AC adapter External timer playbackMode, the timer symbol lights up in green Set up the time, etc., of the external timer Dubbing machine BR-DV6000Displaying the time code Time CodePresetting the time code Recording the time code Recording from preset dataPreset time code TCG Source Internal TCG Select PresetTCG Select TCG ModeRecording time code, input to the DV IN/OUT terminal TCG SourceSet TCG Source to Òexternaló Front switchesRecord time codes from an external time code generator TC/UB/CLOCK1/2 Menu screenMonitor / LCD Status display Set the Counter switch to Òtcó or ÒubóPress the Play button to go to the Playback mode Playing back the time codeYes*2 Edit Editing with an RS-422A/JVC bus edit remote controllerEdit mode Analog editing Mode select KHz modeAUD-2 AUD-1 Following editing mode is not availableEdit mode DV editing Mode select AUD-1 To edit with DV connection Editing procedure with BR-DV6000 Remote 1/2 Menu screen Remote 2/2 Menu screenConfirmation by preview editing Setting the Time Code mode used as editing recorder Setting of RM-G820 Making prerecorded base tape used as editing recorderController Type in the Remote 2/2 Menu screen Using a non-linear editing systemRemote FF/REW Mode EditStructure of the Menu screens Menu ScreensTOP Menu screen Setting the menus Set BR-DV6000 to the Stop or Still mode Displaying the Menu screen items for settingSystem 2/2 Menu screen System 1/2 menu TOP Menu screenSystem Menu screens Description of the Menu screens75MIN Backup REC25MIN 55MIN System 2/2 Menu Menu Screens Description of the Menu screens Remote 1/2 Menu screen Remote Menu screens Remote 2/2 Menu screen Zation DelayPB Start SynchroniAudio Menu screen Video Menu screen TC/UB/CLOCK 1/2 Menu screen TC/UB/CLOCK Menu screensDate REC Adjust TC/UB/CLOCK 2/2 Menu screen BIT PAL Display 1/2 Menu screen Display Menu screens Display 2/2 Menu screen RS-232C Interface Command tablesRxD RS-232C specificationsAscii code table 9PIN D-Sub Pin No Preparation RS-232C commandsCommand Description Error commands Return commands from the VCRExample of Clear Error RS-232C Interface RS-232C commands Third byte Setup preset commands First byte Bit No Status If the bit is Second byteExample Set Sync Select to External Menu switch setup commandED Memory SW Preset B/J1 Example Check the Sync Select settingSet value Corresponding bit values D1/D2 System MenusD1/D2 MenuMenu Set value Remote Menus Audio Menus Video Menus TC/UB/CLOCK Menus Display Menus MAX512H 24H Others Alarm display Displayed regardless of the Display mode Warning display Displayed regardless of the Display mode Troubleshooting Press the Menu button to return to the normal screen Set BR-DV6000 to the Stop modeChecking the hour meter ¥ The System 1/2 Menu screen is displayed XLR OUT board SA-X62U Installing SA-X61U or SA-X62UOptional devices RS-232C interface board SA-K46U XLR in board SA-X61URemove the RS-422A Remote 1 terminal Installing SA-K46U RS-232C interface boardInstall the SA-K46U Hexagonal screwsSpecifications 212 External dimensions Unit mmAC adapter section SupplementVictor Company of JAPAN, Limited