JVC BR-DV6000U PB Start, Delay, Synchroni, Zation, Controller, Sel, TYPE1, TYPE2, TYPE3, TYPE4

REMOTE (2/2) Menu screen (continued)

Items	Setting		Description
PB START	0F	For adjusting the edit timing. With the remote controller in use, if
DELAY		the start points of edit are not concurrent, adjust the playback
	15F	startup timing:
		0F	: No correction.
		1F to 15F : Delays the timing by the number of frames set by
			the user. When BR-DV6000 is connected to an
			editing remote controller with no bump function,
			use this setting to adjust the editing precision.
SYNCHRONI-	OFF	For enabling/disabling the bump function when BR-DV6000 is
ZATION	ON	connected to an editing remote controller:
		OFF	: No synchronization.
		ON	: Performs synchronization. The editing precision
			is enhanced. Please set the pre-roll time to at least
			7 seconds.
CONTROLLER	TYPE1	For setting the type of controller to be connected when remote
SEL	TYPE2	control is enabled with the RS-422A interface:
	TYPE3	TYPE1	: RM-G820
	TYPE4	TYPE2	: RM-G860 (set the preroll time to at least 10
	TYPE5	TYPE3	seconds)
	TYPE6		: AG-A850
	TYPE7	TYPE4	: RM-450,PVE-500
		TYPE5 - TYPE7 : (Not in use)
FOOT SW	OFF	For setting when an external switch (e.g., a footswitch) is con-
	L EDGE	nected to the SERIAL REMOTE terminal. Before operating an
	H EDGE	external switch (footswitch) with L EDGE or H EDGE, turn BR-
	L LEVEL	DV6000 to the RECORDING PAUSE or RECORDING mode:
		OFF	: For when the external switch is not used.
		L EDGE	: Recording and recording pause is switched at the
		H EDGE	LOW edge of the external switch signal.
			: Recording and recording pause is switched at the
		L LEVEL	HIGH edge of the external switch signal.
			: Record at the LOW edge and pause recording at
			the HIGH edge of the external switch signal.
PAGE BACK		Return to the REMOTE (1/2) Menu screen.

77