JVC BR-DV6000U Edit Editing with an RS-422A/JVC bus edit remote controller, KHz mode, Yes*2

EDIT – Editing with an RS-422A/JVC bus edit remote controller –

BR-DV6000 is designed to be capable to make tape-to-tape editing by RM-G800/G805 JVC bus remote controller or RM-G820 as well as other equivalent RS-422A remote controller. Of course, it can be applied to feeder player.

¥+/Ð 0 frame editing accuracy with time code, capstan bump (for both recorder and player) and external sync by RS-422A editing controller.

¥Ready for A/B roll editing.

¥Digital editing via DV interface.

Chart for editing mode when BR-DV6000 is used as editing recorder

1)Editing over recorded tape with 48 kHz au- dio in analog interface

Edit mode		Analog editing
Mode select	OSD	48 kHz mode
ASSEM	ASSEM	Yes
VIDEO	INS V	Yes
VIDEO
AUD-1	INS VA	Yes
AUD-2
AUD-1	INS A	Yes
AUD-2
VIDEO	INS VA1	No *
AUD-1
VIDEO	INS VA2	No *
AUD-2
AUD-1	INS A1	No *
AUD-2	INS A2	No *
TC	INS TC	Yes

*: In this mode, even when you start auto edit, editing will automatically stop and warning message will appear. But, preview edit will be performed without any warning message.

2)Editing over recorded tape with 32 kHz au- dio in analog interface

Edit mode		Analog editing
Mode select	OSD	32 kHz mode
ASSEM	ASSEM	Yes*2
VIDEO	INS V	Yes
VIDEO
AUD-1	INS VA	Yes*2
AUD-2
AUD-1	INS A	Yes*2
AUD-2
VIDEO	INS VA12	Yes
AUD-1
VIDEO	INS VA34	Yes
AUD-2
AUD-1	INS A12	Yes
AUD-2	INS A34	Yes
TC	INS TC	Yes

*2 : In case of CH1/CH2/CH3/CH4 simultaneous insert or assemble edit mode of 32 kHz audio, input signal to audio input connector CH1/CH3 is recorded onto CH1 and CH3 tracks simulta- neously and input signal to audio input con- nector CH2/CH4 is recorded onto CH2 and CH4 tracks simultaneously.

64