JVC BR-DV6000U instruction manual S3125A

Page 2

1.Read all of these instructions.

2.Save these instructions for later use.

3.All warnings on the product and in the operating instructions should be adhered to.

4.Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

5.Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.

6.Do not use this appliance near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

7.Do not place this appliance on an unstable cart, stand, or table. The appliance

may fall, causing serious injury to a child or adult, and serious damage to the appliance.

Use only with a cart or stand recommended by the manufacturer, or sold with the appliance.

Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart

combination to overturn.

S3125A

8.Slots and openings in the cabinet and the back or bottom are provided for

ventilation, and to insure reliable operation of the appliance and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface. This appliance should never be placed near or over a radiator or heat register. This appliance should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.

9.This appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. For appliance designed to operate from battery power, refer to the operating instructions.

10.This appliance system is equipped with a 3-wire grounding type plug (a plug having a third (grounding) pin). This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding plug.

11.For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

12.Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be abused by persons walking on it.

13.Follow all warnings and instructions marked on the appliance.

14.Do not overload wall outlets and extension cords as this can result in fire or electric shock.

15.Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.

16.Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17.Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power cord or plug is damaged or frayed.

b.If liquid has been spilled into the appliance.

c.If the appliance has been exposed to rain or water.

d.If the appliance does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation.

e.If the appliance has been dropped or the cabinet has been damaged.

f.When the appliance exhibits a distinct change in performance – this indicates a need for service.

18.When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

19.Upon completion of any service or repairs to this appliance, ask the service technician to perform routine safety checks to determine that the appliance is in safe operating condition.

2

Image 2
Contents DV Video Cassette Recorder LLT0033-001C-HS3125A Remarque Reorient or relocate the receiving antennaCompatible mechanisms for standard/mini DV cas- sette tapes Backup recording functionDV format Sync in terminalTable of Contents  Place of storage and use IntroductionRemarks of usage  Handling the unit Head cleaning Regular maintenance Regular maintenance Maintenance consultationMemo Cleaning tapeCassette tape Remarks on the use of tapeIt is used at a place of high humidity CondensationOver 10 years Head drum VideotapeCassette loading slot/LED Names and Functions of PartsFront panel Operate button/LED FF button/LED  Play button/LED Pause button/LED  Stop buttonSwitching is invalid during recording 4REMOTE/LOCAL switch Input Select switchAudio Output switch Memo  The following information is also dis- played Audio Monitor switchCounter switch CH2/4 Reset button@PHONES Headphone volume Menu buttonSpecial functions/Setting buttons Video Y/C in terminal 4-PIN Rear panelVideo Line in terminal BNC Video Line OUT terminal BNCTime Code OUT terminal BNC Sync in synchronization input Terminal BNCTime Code in terminal BNC CH1/3 Audio in terminal RCASignal GND terminal DC power input terminal 2-PIN Timer recording/playbackSwitch DC power cord clamp Mini jack› Remote 2 JVC Bus terminal 12-PIN ¤ Serial Remote OUT terminal mini jack‹ Remote 1 RS-422A terminal Slot cover for an optional boardOn-screen display Description Operation ON-SCREEN DisplayOn-screen display Sampling frequency/audio Status displayMemo Output CHCounter display 00 00 00Display Description Insert editing in the 32 k audio modeStatus/Event display Display displayed during operationAlarm display Blank DUB Inhibit DUB InhibitREC TAB Dvcam Edit InhibitLCD  LCD display mode enlarged displayLCD display It is displayed when condensation occurs Displays the framing mode of the time codeDisplays the operation mode of the VCR Non-drop frame Input signal Connecting video signals Output signal ConnectionPlayback  Synchronization signalYes RecordHeadphone terminal Connecting audio signalsAudio Output switches and output channels Microphone input terminal Connecting to a monitor TVDigital output Digital input Remote extension cable Connecting to editing sytem Related VCRs  DV cable When an RS-422A-compatible remote controller is used Connection Connection with serial remote terminals Dubbing with 1 VCRAlarm message Connecting the AC adapterDC in terminal Timer switch Connect the supplied AC adaptor to BR-DV6000Turning on/off the power Turning on the powerTurning off the power PreparationRemote controller and operation lock mode Selecting the operating method main unit/remote controllerOperation Lock mode Operation method main unitLoading/Ejecting cassette Loading the cassette tapeEjecting the cassette tape Setting the display time of the LCD display Setting the LCD displayAdjusting the LCD display  Selecting the LCD status displaySetting the date and time in the Clock Adjust Menu screen Setting date and timeSetting/Displaying date and time  Display 2/2 Menu screen Selecting date/time displayOn-screen status display Setting RecordingRecording index signals Recording procedurePress the Pause button while holding down the A.DUB button Audio dubbingPress the Play button to play the tape Press the Play buttonMinute tape RECORDING- Backup recording function For using GY-DV5000 as the source unit 115MIN Minute tape 175MIN 265MINBR-DV6000 Serial remote controller RM-G30, sold separately can be conRecording Recording with serial remote terminals Output from the Serial Remote OUT terminal. Only with OperSet the time, etc., of the external timer External timer recordingAdjust the recording level of sound LCD display System Menu screen  Setting the switches on the front panelPlayback  Video MenuFast forward/rewind Basic playback procedurePlayback of tapes recorded in the PAL format Special playback functions Search modeFrame-advance playback Search speedREW button Increasing the playback speed by 7%Decreasing the playback speed by 10% Search function Index searchBlank search  In the Stop mode, press the Blank buttonRepeat operation  Repeat Mode in the System 1/2 Menu screenRepeat playback Index repeat playbackClearing registered cue-up points For details on time code setting and recordingRegistering cue-up points Multi cue-upSearching cue-up points Changing cue-up pointsExiting the Multi Cue-up screen Set up the time, etc., of the external timer External timer playbackMode, the timer symbol lights up in green  Connect the supplied AC adapter BR-DV6000  Dubbing machineTime Code Displaying the time codePresetting the time code TCG Source Internal TCG Select Preset Recording from preset dataPreset time code Recording the time codeTCG Source TCG ModeRecording time code, input to the DV IN/OUT terminal TCG Select TC/UB/CLOCK1/2 Menu screen  Front switchesRecord time codes from an external time code generator Set TCG Source to ÒexternalóPlaying back the time code Set the Counter switch to Òtcó or ÒubóPress the Play button to go to the Playback mode Monitor / LCD Status displayKHz mode Edit Editing with an RS-422A/JVC bus edit remote controllerEdit mode Analog editing Mode select Yes*2AUD-1  Following editing mode is not availableEdit mode DV editing Mode select AUD-2 AUD-1 Remote 2/2 Menu screen Editing procedure with BR-DV6000 Remote 1/2 Menu screen  To edit with DV connectionMaking prerecorded base tape used as editing recorder  Setting the Time Code mode used as editing recorder Setting of RM-G820 Confirmation by preview editingEdit Using a non-linear editing systemRemote FF/REW Mode Controller Type in the Remote 2/2 Menu screenMenu Screens Structure of the Menu screensDisplaying the Menu screen items for setting Setting the menus Set BR-DV6000 to the Stop or Still mode TOP Menu screenSystem 2/2 Menu screen Description of the Menu screens TOP Menu screenSystem Menu screens  System 1/2 menu55MIN Backup REC25MIN 75MINMenu Screens Description of the Menu screens  System 2/2 MenuRemote Menu screens  Remote 1/2 Menu screen Remote 2/2 Menu screen Synchroni DelayPB Start ZationAudio Menu screen Video Menu screen TC/UB/CLOCK Menu screens  TC/UB/CLOCK 1/2 Menu screenBIT PAL Adjust TC/UB/CLOCK 2/2 Menu screen Date RECDisplay Menu screens  Display 1/2 Menu screen Display 2/2 Menu screen Command tables RS-232C Interface 9PIN D-Sub Pin No RS-232C specificationsAscii code table RxDRS-232C commands  PreparationCommand Description Return commands from the VCR Error commandsExample of Clear Error RS-232C Interface RS-232C commands  Second byte  Setup preset commands First byte Bit No Status If the bit is  Third byteExample Check the Sync Select setting  Menu switch setup commandED Memory SW Preset B/J1 Example Set Sync Select to ExternalMenu  System MenusD1/D2 Set value Corresponding bit values D1/D2Remote Menus Menu Set value TC/UB/CLOCK Menus  Audio Menus Video Menus 12H 24H  Display MenusMAX5  Alarm display Displayed regardless of the Display mode Others Warning display Displayed regardless of the Display mode Troubleshooting ¥ The System 1/2 Menu screen is displayed  Set BR-DV6000 to the Stop modeChecking the hour meter Press the Menu button to return to the normal screen RS-232C interface board SA-K46U  XLR in board SA-X61U Installing SA-X61U or SA-X62UOptional devices  XLR OUT board SA-X62UHexagonal screws Installing SA-K46U RS-232C interface boardInstall the SA-K46U Remove the RS-422A Remote 1 terminalSpecifications  External dimensions Unit mm 212Supplement AC adapter sectionVictor Company of JAPAN, Limited