4.After the Digital Player is ready, click on Start to begin firmware update.
Note: Do Not disconnect the device or run any programs during the firmware update.
Troubleshooting
Problem | Solution | ||
|
|
| |
Device does not | The battery may be uncharged. Charge it | ||
turn on | following the instructions. | ||
|
| A problem may exist with the rechargeable | |
|
| battery. Contact the service center. | |
|
|
| |
Buttons | don’t | Maybe you have moved the HOLD slider to | |
work |
| the locking position and all controls have | |
|
| been deactivated. Move it again to unlock | |
|
| the controls. | |
|
|
|
5. Once the firmware update is completed, click Close to exit the program.
The computer does not recognize the Digital Player
Check the USB connection to the PC USB port. Turn the Digital Player off and on again and retry.
There is no sound
Check the volume setting is not set to 0 and make sure the earphones are plugged properly in the earphone jack.
Strange | characters | Make sure you have selected the correct |
on screen |
| language. |
|
|
|
36 | 37 |