GENERAL
Two different alarm times can be set. This can be useful when you need to be woken up at a different time e.g. during the week and at the weekend:
•ALARM 1 – radio mode
•ALARM 2 – buzzer mode. The gentle wake buzzer alarm increases its beep tone frequency within seconds.
SETTING THE ALARM TIME AND MODE
1.Turn the SET control to ALARM 1 or ALARM 2.
™Display shows the alarm time digits with the
or indicators flashing.
2.Press 7 repeatedly or hold down on the button to adjust the hours.
Release 7 when you reach the correct hour.
3.Press 8 repeatedly or hold down on the button to adjust the minutes.
Release 8 when you reach the correct minute setting.
4.Turn the SET control back to CLOCK.
5.While the radio is switched off, select your choice of alarm mode by pressing ALARM
™Display shows or .
USING THE ALARM
Notes: If you have selected the ALARM 1 RADIO, make sure you have properly tuned to a station before turning off the set.
If you set and activate the same alarm time for both alarms, only the ALARM
SWITCHING OFF THE ALARM
There are three ways of switching off the alarm. Unless you cancel the alarm completely, the 24 hour alarm reset option will be automatically selected after 59 minutes, from the time your alarm time first goes off.
24 hour alarm reset
If you want the alarm mode to be stopped immediately but also wish to retain the same alarm setting for the following day:
•Press ALARM RESET/ RADIO OFF.
™You will hear a beep tone confirming 24 hour reset activation.
English
9